Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by hawglips »

I bought a new-to-me Stevens 220A 20 ga (2-3/4" chamber) with a 28" fixed full barrel a few weeks back. The muzzle mics in at .581. It's as light as my Yildiz .410 and carries around real nice. I decided to put sling swivel studs on it so I could sling, but since the forearm snaps off, I wrapped camo tape around the forearm and barrel in hopes that will keep it on tight. If I'm going to take it hunting, I'd like to sling it because I often cover a lot of ground and like my hands free to work calls.

Anyway, with the new Gualandi wads out I wanted to see how they shoot, and so worked up a couple 2-3/4" loads with the shorter wad. And I wanted to see how the fixed choke shoots, and decide whether I wanted to get it cut and choked.

Here's how the new 2-3/4" loads shot through the Stevens:

40 yds, 10" and 20" circles

2-3/4" 1-5/8 oz #9s - 1078 fps, 11448 psi
Image


2-3/4" 1-3/4 oz #9s - 1181 fps, 10182 psi
Image


2-3/4" 1-7/8 oz #9s - 1146 fps, 11548 psi
Image

I was pretty pleased with how the fixed full choke shoots them, though I'm certain we'll be seeing some more impressive numbers with proper turkey chokes. But I think I'm going to leave the Stevens alone and shoot it as is.
Last edited by hawglips on September 7th, 2018, 10:01 am, edited 1 time in total.
coconut
Posts: 475
Joined: February 17th, 2017, 8:39 pm

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by coconut »

9’s?
User avatar
GLS
Gobbler Nation
Gobbler Nation
Posts: 3564
Joined: May 16th, 2012, 11:29 am
Location: Lowcountry, GA

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by GLS »

For hunting, I don't see how re-choking would make an appreciable difference. All the patterns look fine. There doesn't appear to a be significant difference in counts in any of the patterns. It's just how much your shoulder is willing to take among the load choices. You might quibble with the 10-20 in the lightest load having a fist sized hole at 11:00, but whose to say what the next shot would do in any of the patterns? Book'em,Dano. Gil
PS: Howse POA/POI?
User avatar
Spuriosity
Gobbler Nation
Gobbler Nation
Posts: 2758
Joined: April 23rd, 2012, 10:12 pm
Location: Western North Carolina

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by Spuriosity »

Looking good. If it's as light as the Yildiz, I don't think I'd want to shoot more than 1&5/8s oz. So I assume you like the new wads?
User avatar
el diablo
Gobbler Nation
Gobbler Nation
Posts: 1266
Joined: June 28th, 2012, 12:37 am

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by el diablo »

Nice work Hal! 1 7/8oz probably made you feel alive when ya touched it off. lol
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by hawglips »

coconut wrote: September 6th, 2018, 8:11 pm9’s?
Sorry, yes, 9s.
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by hawglips »

GLS wrote: September 7th, 2018, 5:11 am For hunting, I don't see how re-choking would make an appreciable difference. All the patterns look fine. There doesn't appear to a be significant difference in counts in any of the patterns. It's just how much your shoulder is willing to take among the load choices. You might quibble with the 10-20 in the lightest load having a fist sized hole at 11:00, but whose to say what the next shot would do in any of the patterns? Book'em,Dano. Gil
PS: Howse POA/POI?
I'm consistently shooting a bit low and right, but the trigger is a bit stiff. I will shoot it some more and get used to the bead placement it likes before I worry about the trigger...
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by hawglips »

el diablo wrote: September 7th, 2018, 8:07 am Nice work Hal! 1 7/8oz probably made you feel alive when ya touched it off. lol
Yeah, that's a fact...
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by hawglips »

Spuriosity wrote: September 7th, 2018, 7:36 am Looking good. If it's as light as the Yildiz, I don't think I'd want to shoot more than 1&5/8s oz. So I assume you like the new wads?
I may slip down to 1-7/16 oz...
User avatar
GLS
Gobbler Nation
Gobbler Nation
Posts: 3564
Joined: May 16th, 2012, 11:29 am
Location: Lowcountry, GA

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by GLS »

Hal, I posted patterns in my factory full 220A over 4 years ago shooting the Kyle Smith 1 oz. and your 1 5/16 oz. loads. They looked good enough for hunting. The trigger is smooth and light. POA/POI off the bead--eh.
viewtopic.php?f=16&t=7616&p=77874&hilit=Savage#p77874
2Shooter
Gobbler Nation
Gobbler Nation
Posts: 1230
Joined: January 6th, 2016, 9:18 pm
Location: North Georgia

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by 2Shooter »

Hey Hal get with Gun Docc in Toccoa, Ga he can fix that forearm where it will stay on with a sling!!!
User avatar
GLS
Gobbler Nation
Gobbler Nation
Posts: 3564
Joined: May 16th, 2012, 11:29 am
Location: Lowcountry, GA

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by GLS »

Apparently Savage made several design changes during the time it made the break action 220. On my 220A, the forend is attached to the barrel with a screw and it has a larger trigger guard than on my .410 220B and 16 ga. 220D. The 220 is truly hammerless; it's not just an internal hammer striking a transfer bar. It has a firing pin propelled by a coil spring. The design is far more complex than what superficially meets the eye. Gil
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by hawglips »

GLS wrote: September 7th, 2018, 10:22 am Hal, I posted patterns in my factory full 220A over 4 years ago shooting the Kyle Smith 1 oz. and your 1 5/16 oz. loads. They looked good enough for hunting. The trigger is smooth and light. POA/POI off the bead--eh.
viewtopic.php?f=16&t=7616&p=77874&hilit=Savage#p77874
I remember that thread. Thanks for the reminder...
crow
Posts: 598
Joined: July 17th, 2017, 7:01 pm

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by crow »

I shot your 1 5/8oz of load of #9's out of an old 220 LE the other day, it's a side lever with 28" barrel.
it had 248 in the 10" at 40yds with a nice even pattern in the 10

POA to POI is not bad with the factory bead, it shot 1 1/2" left of the center of the 10" and just need to see one bead of barrel under the bead for elevation (or just put the bead under his head for good head/neck coverage)
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by hawglips »

I'm going to take the 220A out tomorrow for a field test if the creek don't rise. Loaded up the StubbyXLG load for it and gonna shoot it with just the bead.
crow
Posts: 598
Joined: July 17th, 2017, 7:01 pm

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by crow »

The above load was with the big 20 stubby nc

it is .588 at the muzzle and weighs 6lbs, a little heavy for a single but still nice to carry

good success tomorrow, I'm glad this storm isn't' snow
User avatar
GLS
Gobbler Nation
Gobbler Nation
Posts: 3564
Joined: May 16th, 2012, 11:29 am
Location: Lowcountry, GA

Re: Stevens 220A 20 ga, 2-3/4", 28" fixed full, new loads

Post by GLS »

Even at 6 lbs, your LE as you say is a good carry. I like the way a single-shot sits on the knee without rattling and its slenderness makes for a good single hand carry.
Post Reply

Return to “Small Bore”