20 Ga. Clear Overshot Cards?????

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
User avatar
turkeyinstrut
Gobbler Nation
Gobbler Nation
Posts: 1226
Joined: April 13th, 2016, 12:32 pm

20 Ga. Clear Overshot Cards?????

Post by turkeyinstrut »

Does anybody know who makes the 20 ga. clear overshot cards? I would like to buy a bunch of them and offer them up to GN members as I have seen several people wanting them.
User avatar
turkeyinstrut
Gobbler Nation
Gobbler Nation
Posts: 1226
Joined: April 13th, 2016, 12:32 pm

Re: 20 Ga. Clear Overshot Cards?????

Post by turkeyinstrut »

Still searching, I know somebody makes them because a gentleman just gave me 200 of them. Any help would be greatly appreciated.
TNHunter61
Posts: 38
Joined: March 29th, 2016, 5:59 pm

Re: 20 Ga. Clear Overshot Cards?????

Post by TNHunter61 »

When you find them please post. I can’t find them anywhere
User avatar
turkeyinstrut
Gobbler Nation
Gobbler Nation
Posts: 1226
Joined: April 13th, 2016, 12:32 pm

Re: 20 Ga. Clear Overshot Cards?????

Post by turkeyinstrut »

TNHunter61 wrote: February 8th, 2018, 1:55 pm When you find them please post. I can’t find them anywhere
Will do, I know there is a company that makes them I just can't find out who it is. :banghead: If I ever find them I am going to order a BUNCH of them and offer them up to GN members.
MattBronc
Posts: 51
Joined: February 8th, 2018, 7:45 am

Re: 20 Ga. Clear Overshot Cards?????

Post by MattBronc »

I would definitely buy some!
User avatar
crenshawco
Posts: 587
Joined: May 10th, 2013, 12:28 pm
Location: Alabama

Re: 20 Ga. Clear Overshot Cards?????

Post by crenshawco »

Just out of curiosity, why is there a preference to the clear OSCs?
User avatar
turkeyinstrut
Gobbler Nation
Gobbler Nation
Posts: 1226
Joined: April 13th, 2016, 12:32 pm

Re: 20 Ga. Clear Overshot Cards?????

Post by turkeyinstrut »

crenshawco wrote: February 8th, 2018, 10:14 pm Just out of curiosity, why is there a preference to the clear OSCs?
I think it's mostly just that "Cool" factor. :walk:
User avatar
turkeyinstrut
Gobbler Nation
Gobbler Nation
Posts: 1226
Joined: April 13th, 2016, 12:32 pm

Re: 20 Ga. Clear Overshot Cards?????

Post by turkeyinstrut »

Actually you can roll a crimp down a lot tighter on them as they are about .070 thick.
User avatar
Spuriosity
Gobbler Nation
Gobbler Nation
Posts: 2760
Joined: April 23rd, 2012, 10:12 pm
Location: Western North Carolina

Re: 20 Ga. Clear Overshot Cards?????

Post by Spuriosity »

And if the 20s are like the 12s, they are frangible, i.e. they shatter upon ignition and get out of the way of the shot. The theory being that they improve patterns compared to cardboard OSCs. Additionally there is no need to waterproof them.
Fl strutter
Posts: 331
Joined: April 26th, 2017, 7:23 pm
Location: Jasper, Florida

Re: 20 Ga. Clear Overshot Cards?????

Post by Fl strutter »

I've had better luck with rolls and patterns with the card board osc than plastic in the 12 gauge
Gar Commander
Posts: 374
Joined: February 26th, 2013, 6:52 pm

Re: 20 Ga. Clear Overshot Cards?????

Post by Gar Commander »

Like FL Strutter above, I have noticed on the 12 ga clear OSC if you don't really crimp it hard initially that over time they will loosen up a little and shot will shake inside the shell. I have not had that problem with paper OSC.
Fl strutter
Posts: 331
Joined: April 26th, 2017, 7:23 pm
Location: Jasper, Florida

Re: 20 Ga. Clear Overshot Cards?????

Post by Fl strutter »

Also sometimes it wouldn't roll enough down to cover air vent hole on osc and buffer would leak out and I was rolling not than 1/4 inch down and load was super tight. I use the thicker red osc from bpi and have had great luck with them.
User avatar
huntin
Posts: 71
Joined: May 10th, 2017, 10:55 am
Location: North Georgia

Re: 20 Ga. Clear Overshot Cards?????

Post by huntin »

Any concerns about pressure changes with the .070 clear OSC?
User avatar
turkeyinstrut
Gobbler Nation
Gobbler Nation
Posts: 1226
Joined: April 13th, 2016, 12:32 pm

Re: 20 Ga. Clear Overshot Cards?????

Post by turkeyinstrut »

huntin wrote: February 11th, 2018, 10:38 am Any concerns about pressure changes with the .070 clear OSC?
I have talked to a couple of knowledgeable people about this in the past, both said the same thing, not enough difference to be concerned with.
User avatar
huntin
Posts: 71
Joined: May 10th, 2017, 10:55 am
Location: North Georgia

Re: 20 Ga. Clear Overshot Cards?????

Post by huntin »

turkeyinstrut wrote: February 11th, 2018, 11:30 am
huntin wrote: February 11th, 2018, 10:38 am Any concerns about pressure changes with the .070 clear OSC?
I have talked to a couple of knowledgeable people about this in the past, both said the same thing, not enough difference to be concerned with.
Thanks, I made a couple and will try them out tomorrow.
aeasley10
Posts: 127
Joined: February 12th, 2017, 9:28 pm

Re: 20 Ga. Clear Overshot Cards?????

Post by aeasley10 »

Let us know if anyone finds or makes a bunch of these. I’d like to buy some as well


Sent from my iPhone using Tapatalk
User avatar
01Foreman400
Posts: 431
Joined: March 4th, 2013, 3:33 pm

Re: 20 Ga. Clear Overshot Cards?????

Post by 01Foreman400 »

Anyone ever find any?
User avatar
wbpc
Posts: 51
Joined: June 29th, 2012, 7:12 am

Re: 20 Ga. Clear Overshot Cards?????

Post by wbpc »

I ordered some from siarm when I ordered my roll crimping tools from them. I’m not sure what shipping would be on just the osc. I think they charged me $45 for two roll crimping tools along with my osc cards.


Sent from my iPhone using Tapatalk
Post Reply

Return to “Small Bore”