Shooters 1 5/8

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
User avatar
WV Ridge Reaper
Gobbler Nation
Gobbler Nation
Posts: 1064
Joined: July 16th, 2014, 10:19 pm
Location: Some Where Deep In West By God Chasing A Turkey

Shooters 1 5/8

Post by WV Ridge Reaper »

Well with the warm weather I finally got to put some TSS threw some paper

Here a few pictures,I was lucky enough to take since the over pressure load didn't take me out...Should work for the hills and hollars and the occasional off the limb shot


Shot a IC 555 at 30&40 then a IC 562 at 40
Image

Image

Image



Sent from somewhere deep in West By God
The man who passes the sentence should swing the sword
Swampchickin234
Posts: 148
Joined: January 28th, 2016, 2:49 pm

Re: Shooters 1 5/8

Post by Swampchickin234 »

That's smoking buddy.


Sent from my iPhone using Tapatalk
User avatar
guesswho
Gobbler Nation
Gobbler Nation
Posts: 5426
Joined: July 11th, 2011, 7:50 pm
Location: Bumpass VA, moving to Fuget KY

Re: Shooters 1 5/8

Post by guesswho »

Leaves burnt orange holes in the paper. Yep, first indicator of a high pressure load.
Double Naught Spy!
RCD's Owner----------------Badonka Deke Prostaff
MoHo's Prostaff-------------Lighter Than HTL Shooter
The Storm Whistle Prostaff
Official Member Of The Unofficial Firedup Turkey Calls Prostaff
pedro
Gobbler Nation
Gobbler Nation
Posts: 2190
Joined: June 6th, 2012, 9:21 am

Re: Shooters 1 5/8

Post by pedro »

guesswho wrote:Leaves burnt orange holes in the paper. Yep, first indicator of a high pressure load.
Yep, orange hole = high p2
User avatar
redarrow
Gobbler Nation
Gobbler Nation
Posts: 5856
Joined: October 2nd, 2011, 9:26 am
Location: S E Michigan

Re: Shooters 1 5/8

Post by redarrow »

Be careful son. Them HP loads might knock off heads on both ends.
Put you plans in the nail scarred hands.
User avatar
Dr Juice
Posts: 211
Joined: March 17th, 2017, 7:05 am

Re: Shooters 1 5/8

Post by Dr Juice »

Simply brutal! Congrats.
Deom
Posts: 17
Joined: March 14th, 2017, 1:48 pm

Re: Shooters 1 5/8

Post by Deom »

Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
drenalinld
Gobbler Nation
Gobbler Nation
Posts: 1330
Joined: December 10th, 2011, 8:37 pm

Re: Shooters 1 5/8

Post by drenalinld »

Deom wrote:Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
I think mine fit flush. I will screw it in a little later today and get you a pic.
User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 2988
Joined: May 13th, 2013, 6:25 pm
Location: southern onio

Re: Shooters 1 5/8

Post by Turkinator »

Deom wrote:Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
Tiny gap in mine. Almost unnoticed
User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 2988
Joined: May 13th, 2013, 6:25 pm
Location: southern onio

Re: Shooters 1 5/8

Post by Turkinator »

Dr Juice wrote:Simply brutal! Congrats.
brutal on turkeys too!!!!
taylorjones20
Posts: 223
Joined: March 6th, 2015, 11:17 pm
Location: Beech Bluff, TN

Re: Shooters 1 5/8

Post by taylorjones20 »

Deom wrote:Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
Yep. I've noticed it on my M2 and also a browning maxus, and browning gold.
User avatar
vaturkey
Gobbler Nation
Gobbler Nation
Posts: 3617
Joined: June 27th, 2011, 10:54 pm

Re: Shooters 1 5/8

Post by vaturkey »

Small slight gap on mine also with IC choke . Wont hurt a thing as long as you got it screwed all the way in ! :thumbup:
turkey_slayer
Posts: 659
Joined: February 14th, 2013, 10:06 am

Re: Shooters 1 5/8

Post by turkey_slayer »

Deom wrote:Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
Yep small gap. As long as it mates up inside you're all good
decoykrvr
Posts: 853
Joined: February 10th, 2015, 1:28 pm

Re: Shooters 1 5/8

Post by decoykrvr »

If there is a slight gap double up on the thread grease esp. at the bottom of the tube which will mitigate the potential erosion/corrosion caused by the hot gasses.
User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 2988
Joined: May 13th, 2013, 6:25 pm
Location: southern onio

Re: Shooters 1 5/8

Post by Turkinator »

The gap is not where the choke mates with the bore or you would have a yuge problem. It's where the choke seats on the end of the barrel
User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 2988
Joined: May 13th, 2013, 6:25 pm
Location: southern onio

Re: Shooters 1 5/8

Post by Turkinator »

This
Attachments
20170327_173609.jpg
Deom
Posts: 17
Joined: March 14th, 2017, 1:48 pm

Re: Shooters 1 5/8

Post by Deom »

Turkinator wrote:This
Yeah mine is worse than that. The packaging says gaps are allowed up to 1/32. Mine is right at an 1/8". I wish I knew how to post a dang picture on here.
pullit
Gobbler Nation
Gobbler Nation
Posts: 1363
Joined: June 27th, 2012, 1:58 pm
Location: Middle/West TN

Re: Shooters 1 5/8

Post by pullit »

Thank God your ok from shooting those,......but good patterns.....:-)
I may not be smart but I can lift heavy objects

I have no need for a 30-06, I have a shotgun
fountain
Posts: 469
Joined: August 18th, 2012, 12:25 am

Re: Shooters 1 5/8

Post by fountain »

What load were you shooting that was over pressured? What was the psi?
SumToy
Posts: 317
Joined: July 2nd, 2012, 8:39 am

Re: Shooters 1 5/8

Post by SumToy »

that is not a problem if a small gap.(not 1/8) That just lets you know they are bottom out on inside of the barrel. Ours do the same.
Post Reply

Return to “Small Bore”