Boat mod's
- ArkansasDon
- Posts: 646
- Joined: August 10th, 2012, 12:24 pm
Boat mod's
changing duck boat over into bowfishing rig. Cant duck much anymore work has me busy, took up bowfishing. Been working on it off and on for 9 months.
started off from this
decided to weld up some alumin 1"tubing & 2" alumin angle for the framing of the flush mount deck, installed a 3 bank charger & 3 battery trays.
made up a control panel for the light, and battery check with fuse box
made up the light/knee rails from 1" thin wall tubing
changed the troller motor shaft from a 40" to 56"
building the deck and attaching the light / knee rail. Install the rubber for the floor.
installing the trolling motor plug & bow mount for the troller motor.
Mounted the LED Lights 6 27W LED's on the side, 3 per side, 2 40w LED's in front. Made the risers for the light from solid Alumin 3/4" round stock, drilled & tapped them, sand blasted them & moly coated them in satin black.
I'm building the box for 2 55amp Powermax converters, and still have to finish the wiring for the lights.
started off from this
decided to weld up some alumin 1"tubing & 2" alumin angle for the framing of the flush mount deck, installed a 3 bank charger & 3 battery trays.
made up a control panel for the light, and battery check with fuse box
made up the light/knee rails from 1" thin wall tubing
changed the troller motor shaft from a 40" to 56"
building the deck and attaching the light / knee rail. Install the rubber for the floor.
installing the trolling motor plug & bow mount for the troller motor.
Mounted the LED Lights 6 27W LED's on the side, 3 per side, 2 40w LED's in front. Made the risers for the light from solid Alumin 3/4" round stock, drilled & tapped them, sand blasted them & moly coated them in satin black.
I'm building the box for 2 55amp Powermax converters, and still have to finish the wiring for the lights.
Last edited by ArkansasDon on August 10th, 2012, 6:45 pm, edited 1 time in total.
Camo Solutions http://www.camo-solutions.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
- Hognutz
- Gobbler Nation
- Posts: 8212
- Joined: June 28th, 2011, 5:29 pm
- Location: S.E. Wisconsin. Global Flatulater
Re: Boat mod's
Wow!! Did that take a week or so?? Just kidding.. Well done..
May I assume you're not here to inquire about the alcohol or the tobacco?
I am the man from Nantucket.
“Leave the gun, take the cannoli” -Clemensa
When attacked by a group of clowns...Go for the Juggler!!
I am the man from Nantucket.
“Leave the gun, take the cannoli” -Clemensa
When attacked by a group of clowns...Go for the Juggler!!
- GOLD HUNTER
- Gobbler Nation
- Posts: 4595
- Joined: September 1st, 2011, 10:07 pm
- Location: BIG LICK VA.
- Shooter
- Gobbler Nation
- Posts: 5488
- Joined: April 19th, 2012, 1:29 pm
- Location: Deep South, Middle, TN
Re: Boat mod's
I think you got a nice rig there! I have been bowfishing for 42 years, and I have hunted out of several diff kind of rigs. I think you will like what you have. I actually held the world record on grass carp for 10 years.
1988 to 1998 with a 40lb. It has been broken countless times since.
My Chinese buddies will hardly give me a rest, They eat those Buffalo as fast as I can get them,...lol
1988 to 1998 with a 40lb. It has been broken countless times since.
My Chinese buddies will hardly give me a rest, They eat those Buffalo as fast as I can get them,...lol
- Attachments
-
- Picture 992.jpg (190.22 KiB) Viewed 5501 times
- CamoMan4025
- Gobbler Nation
- Posts: 4236
- Joined: August 31st, 2011, 11:51 am
- Location: Shenandoah Valley, VA
Re: Boat mod's
Holy Crap Don, that thing is the ShaDizzle! WOW, I don't bow fish, but if I did, that would be the rig to be on!
"God, Guts & High Explosives"
-
- Gobbler Nation
- Posts: 1330
- Joined: December 10th, 2011, 8:37 pm
Boat mod's
Where are you in AR? I know a bow crack shot that would love to go bos fishing....lol
- ArkansasDon
- Posts: 646
- Joined: August 10th, 2012, 12:24 pm
Re: Boat mod's
Sharp Co.
Camo Solutions http://www.camo-solutions.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
- ArkansasDon
- Posts: 646
- Joined: August 10th, 2012, 12:24 pm
Re: Boat mod's
Thats nice fish.Shooter wrote:I think you got a nice rig there! I have been bowfishing for 42 years, and I have hunted out of several diff kind of rigs. I think you will like what you have. I actually held the world record on grass carp for 10 years.
1988 to 1998 with a 40lb. It has been broken countless times since.
My Chinese buddies will hardly give me a rest, They eat those Buffalo as fast as I can get them,...lol
Camo Solutions http://www.camo-solutions.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
- Turkey Talker
- Gobbler Nation
- Posts: 3665
- Joined: June 7th, 2011, 9:20 pm
- Location: Green Swamp Florida
- slickyboyboo
- Gobbler Nation
- Posts: 1331
- Joined: June 25th, 2012, 5:12 pm
- Location: Clinton, MS
Re: Boat mod's
Looks good Don! That right there, is a load of fun!
Raising my carbon footprint, one bag of charcoal at a time!
- ArkansasDon
- Posts: 646
- Joined: August 10th, 2012, 12:24 pm
Re: Boat mod's
thanks, still have to build the generator rack, and finish the wiring. The generator is a 4000w 3500w working.I finished the box that holds 2 55amp converters and all the wiring for that. Changes A/C to D/C so the generator can power my troller & charge the lights when the batteries run low. The genny rack will mount over the outboard.
Camo Solutions http://www.camo-solutions.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
- Sloppy_Snood
- Posts: 554
- Joined: September 26th, 2011, 8:52 pm
- Location: Midwest
- Contact:
Re: Boat mod's
Looks like I need a new bowfishing bow..... When are we "sailing?"
.
"You've gotta be original, because if you're like someone else, what do they need you for?"- Bernadette Peters
"You've gotta be original, because if you're like someone else, what do they need you for?"- Bernadette Peters
- ArkansasDon
- Posts: 646
- Joined: August 10th, 2012, 12:24 pm
Re: Boat mod's
soon bro, sooner than you think.Sloppy_Snood wrote:Looks like I need a new bowfishing bow..... When are we "sailing?"
Camo Solutions http://www.camo-solutions.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
- Turkey Talker
- Gobbler Nation
- Posts: 3665
- Joined: June 7th, 2011, 9:20 pm
- Location: Green Swamp Florida
- ArkansasDon
- Posts: 646
- Joined: August 10th, 2012, 12:24 pm
Re: Boat mod's
AMS #310 Retriever
Camo Solutions http://www.camo-solutions.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Re: Boat mod's
That is a sweet rig for sure,but I don't see no "Gobbler Nation" decal. ???
Put you plans in the nail scarred hands.
Re: Boat mod's
Looks great, wont be long and that thing will be sporting a fan.
- ArkansasDon
- Posts: 646
- Joined: August 10th, 2012, 12:24 pm
Re: Boat mod's
thanks y'all. Fan? please dont give me ideas.
Camo Solutions http://www.camo-solutions.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Re: Boat mod's
Fine lookin rig Don !
Re: Boat mod's
ArkansasDon wrote:thanks y'all. Fan? please dont give me ideas.
All you need is a motor, pedestal, cables, brake handle, some bearing, a little metal, prop.
Well put that on your next project. We did one a few years ago.
We used one of these, which saved alot of money. It worked well for our usage. moved a little faster than standard trolling speeds. I think it was a 13hp. Most are or was using the bigger 23+ engines, gets much more expensive.
Re: Boat mod's
you had me all the way, until you put the PINK bow on the front. lol
Looks awesome, some fine craftsmanship and well thought out.
Looks awesome, some fine craftsmanship and well thought out.
For since the creation of the world God’s invisible qualities—his eternal power and divine nature—have been clearly seen, being understood from what has been made, so that people are without excuse. Romans 1:20
- ArkansasDon
- Posts: 646
- Joined: August 10th, 2012, 12:24 pm
Re: Boat mod's
pink bow, thats funny.gblack15 wrote:you had me all the way, until you put the PINK bow on the front. lol
Looks awesome, some fine craftsmanship and well thought out.
Camo Solutions http://www.camo-solutions.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
- ArkansasDon
- Posts: 646
- Joined: August 10th, 2012, 12:24 pm
Re: Boat mod's
N2deer wrote:ArkansasDon wrote:thanks y'all. Fan? please dont give me ideas.
All you need is a motor, pedestal, cables, brake handle, some bearing, a little metal, prop.
Well put that on your next project. We did one a few years ago.
We used one of these, which saved alot of money. It worked well for our usage. moved a little faster than standard trolling speeds. I think it was a 13hp. Most are or was using the bigger 23+ engines, gets much more expensive.
awwwwman! why did ya have to show me that................ the wheels are turning now
Camo Solutions http://www.camo-solutions.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Red Hawk Archery Pro Staff http://www.redhawk-archery.com
Re: Boat mod's
Well we all used a buddies boat. One did most of the work as he used the boat the most. One bought the motor, one bought the prop, and one most of the metal.
Looks like you are real handy with things, you did a great job on everything I have seen. Much better than I would or could have done.
Looks like you are real handy with things, you did a great job on everything I have seen. Much better than I would or could have done.