Page 1 of 1

Indian Creek - M2 20g help

Posted: January 24th, 2018, 9:07 am
by scottyd4662
Anybody have this setup and have a picture of the choke in the barrel....mine looks like to me it’s not mating up correctly....just wondering if there is supposed to be a gap like this....IC says that it’s fine and there is supposed to be a gap, but I’d really like to see someone else’s before I start patterning...

Re: Indian Creek - M2 20g help

Posted: January 24th, 2018, 9:12 am
by taylorjones20
Yep that's normal.

Re: Indian Creek - M2 20g help

Posted: January 24th, 2018, 9:33 am
by turkeyinstrut
Mine is the same way, I think they do this so it is sure to seat up down inside the barrel where it is most important.

Re: Indian Creek - M2 20g help

Posted: January 24th, 2018, 9:35 am
by el diablo
That's how mine looks.

Re: Indian Creek - M2 20g help

Posted: January 24th, 2018, 9:35 am
by scottyd4662
10-4 guys thanks!!

Re: Indian Creek - M2 20g help

Posted: January 24th, 2018, 6:23 pm
by Turkinator
Mine is the same way

Re: Indian Creek - M2 20g help

Posted: January 24th, 2018, 7:41 pm
by ccleroy
Yep

Re: Indian Creek - M2 20g help

Posted: January 24th, 2018, 7:47 pm
by vaturkey
Same Here Also ! :thumbup:

Re: Indian Creek - M2 20g help

Posted: January 24th, 2018, 11:38 pm
by 202P&Y
Same here

Re: Indian Creek - M2 20g help

Posted: January 25th, 2018, 8:04 am
by norINhunter
Mine does the same, let er rip.

Re: Indian Creek - M2 20g help

Posted: January 26th, 2018, 8:28 pm
by coconut
Mine is the same and you probably should check it after every few shots cause mind tends to loosen itself after a few shots.

Re: Indian Creek - M2 20g help

Posted: January 26th, 2018, 10:19 pm
by 2Shooter
Yep that's how mine looks!!! :thumbup:

Re: Indian Creek - M2 20g help

Posted: January 26th, 2018, 11:04 pm
by yella yelper
turkeyinstrut wrote:Mine is the same way, I think they do this so it is sure to seat up down inside the barrel where it is most important.
This is correct. You know the threads are bottoming out inside the barrel and that's good. If it fits snug on the outside with no gap, there's a chance it's not bottomed out inside the barrel and the gap is there