Shoot Results: 2012 Kentucky State Still Target Championship

Sloppy_Snood · Post by **Sloppy_Snood** » August 19th, 2012, 4:53 pm

2012 Kentucky State Still Target Championship
Event Date: August 18, 2012
Sponsor: KY State Chapter
Location: Adair County Sportsmen's Club in Columbia, KY 42728

12 Gauge Open Shooting Class

Winner: Steve Conover - Custom Savage 210 shotgun 12GA shotgun equipped with a Indian Creek Black Diamond Strike choke tube and using Environ-Metal's 3" Hevi-13 2 oz. number 6 shot. Steve shot the highest single 12GA score for the day with a "30."

Runner-Up: Chris Scott - Stock Browning Gold 26" barreled 12GA shotgun equipped with a Indian Creek Black Diamond Strike choke tube and using Environ-Metal's 3" Hevi-13 2 oz. number 6 shot.

20 Gauge Open Shooting Class

Winner: Scott Kirsch - Custom GUNWORKS Savage 220 bolt-action 20GA Shotgun equipped with an Indian Creek Black Diamond Strike choke tube and using Environ-Metal's 3" Hevi-13 1 1/4 oz. number 6 shot. Scott shot the highest single 20GA score for the day with a "25."

Runner-Up: Dan Hrnciar - Custom GUNWORKS Savage 220 bolt-action 20GA Shotgun equipped with an Indian Creek Black Diamond Strike choke tube and using Environ-Metal's 3" Hevi-13 1 1/4 oz. number 6 shot.

Ladies 20 Gauge (Open) Shooting Class

Winner: Karie Scott - Custom GUNWORKS Savage 220 bolt-action 20GA Shotgun equipped with an Indian Creek Black Diamond Strike choke tube and using Environ-Metal's 3" Hevi-13 1 1/4 oz. number 6 shot. Karie shot the highest single 20GA score for the day with a "21."

Runner-Up: Doris Bush - Custom Remington 870 pump-action 20GA shotgun with a TruGlo choke tube and using Environ-Metal's 3" Hevi-13 1 1/4 oz. number 6 shot.

JAKES (17 & under ages) 20 Gauge (Open) Shooting Class

Winner: Eli Sloan - Stock Browning Gold 20GA semi-automatic shotgun equipped with an Indian Creek Black Diamond Strike choke tube and using Environ-Metal's 3" Hevi-13 1 1/4 oz. number 6 shot.

Runner-Up: Alex Fox - Stock Browning Gold 20GA semi-automatic shotgun euipped with an Indian Creek Black Diamond Strike choke tube and using Environ-Metal's 3" Hevi-13 1 1/4 oz. number 6 shot.

12 Gauge Muzzleloading Shotgun Shooting Class

Winner: Brian Sloan - Traditions 12GA muzzleloading shotgun equipped with an Indian Creek Black Diamond Strike choke tube and using 2oz. of Hevi-13 number 6 shot pellets and Swiss ffg real black powder.

Runner-Up: Steve Conover - Traditions 12GA muzzleloading shotgun equipped with an Indian Creek Black Diamond Strike choke tube and using 2 oz. of Hevi-13 number 6 shot pellets and Goex ffg real black powder.

Shoot Notes:

"Amateur Classes" for 12 gauge and 20 gauge and Women's 20GA were shot. This was nice in order to allow newcomers to the sport.
Wind was variable in nearly all directions and light speed at 0 to 7 mph.
Temperatures started at 67°F (@ 9 AM start time) and warmed to 80°F for the 4:30PM shoot end for the day.
Relative Humidity levels were high from 73% at 9AM and decreased to 53% by shoot's end around 4:30 PM; partly cloudy with sunshine
12 and 20 gauge shot shells utilized were in boxes of 5 shot shells
Lower than normal 12GA scores (high teens to low 20s for most of the day)
Winners and Runner Ups for each division received trophys that were presented by NWTF Spokeswoman Brenda Valentine
Great first still shoot hosted by the Adair County Sportsmen's Club!

[/color]

Turkey Talker · Post by **Turkey Talker** » August 19th, 2012, 6:19 pm

indian creek is kicking some butt!
i use jelly head and like the pattern i throw...maybe i should get and indian just to see the difference!

ICDEDTURKES · Post by **ICDEDTURKES** » August 19th, 2012, 7:21 pm

What happened to you and the "Flamer" in the Open

Post by **redarrow** » August 19th, 2012, 7:31 pm

Dad gum IC kick some serious butt.

Sloppy_Snood · Post by **Sloppy_Snood** » August 19th, 2012, 7:34 pm

ICDEDTURKES wrote:What happened to you and the "Flamer" in the Open

The Purple Paper Eater is up in New York for a Da-Mar scope mount installation and did not compete at this shoot.

Purple Paper Eater be back in 2 weeks....hopefully in time for the next "regular season" shoot back in Whittington, Illinois at the Rend Lake Shooting Complex (Click Here) on September 22nd.

Bring your butt and your A game and maybe I will let you carry my gun case.

Turkey Talker · Post by **Turkey Talker** » August 19th, 2012, 7:50 pm

lets see some pics of the PPE

Sloppy_Snood · Post by **Sloppy_Snood** » August 19th, 2012, 8:12 pm

Turkey Talker wrote:lets see some pics of the PPE

All gun decoration and painting completed by CAMO-SOLUTIONS (by my best buddy ArkansasDon!

)

Turkey Talker · Post by **Turkey Talker** » August 19th, 2012, 8:17 pm

what kind of choke....barrel length....and numbers are you throwin at 40 yards.???

NICE LOOKING SHOTTY!!

Sloppy_Snood · Post by **Sloppy_Snood** » August 19th, 2012, 8:29 pm

Turkey Talker wrote:what kind of choke....barrel length....and numbers are you throwin at 40 yards.???

NICE LOOKING SHOTTY!!

Thanks TT.

30" barrel with a 2-inch extended .675" Indian Creek Black Diamond Strike choke tube with a fancy paint job (campfire embers burning but the picture doesn't show the color well).

Throws about 220-240 number 6 pellets in a 10-inch circle at 40 yards (3" Hevi-13 2.0 oz. number 6s shotshell).

BrentM · Post by **BrentM** » August 20th, 2012, 12:00 am

Turkey Talker wrote:indian creek is kicking some butt!
i use jelly head and like the pattern i throw...maybe i should get and indian just to see the difference!

What do you shoot I'm about to sell a Remington .665 that I bought in February at the convention

GOLD HUNTER · Post by **GOLD HUNTER** » August 20th, 2012, 9:00 am

ArkansasDon · Post by **ArkansasDon** » August 20th, 2012, 10:52 am

Scotts gun in different stages

Custom painted stock for a womans Long Range Rifle. 25 mag. 25 cal bullet with 7mm Mag case

another customers gun.

Scotts new gun 20ga. will be my last custom job, I've been turning them down do to my other work as of camo & moly coatings.

Sloppy_Snood · Post by **Sloppy_Snood** » August 20th, 2012, 11:06 am

BrentM wrote:What do you shoot I'm about to sell a Remington .665 that I bought in February at the convention

3" Hevi-13 2.0 oz.number 6s or 7s.
3.5" Hevi-13 2 1/4 oz. 6s or 7s
3" Winchester Extended Range 1 3/4 oz. number 6 shot.
3.5" Winchester Extended Range 2.0 oz. number 6 shot.
3" Winchester HV copper-plated lead 1 3/4 oz. 6s
3.5" Winchester HV copper-plated lead 2.0 oz. 6s
3" Winchester Double-X Magnum Turkey Loads (red hull) 2.0 oz. lead 6s
3.5" Winchester Double-X Magnum Turkey Loads (red hull) 2 1/4 oz. lead 6s
3" Spectra-Shot 1 5/8 oz. nickel-plated lead 6s

ICDEDTURKES · Post by **ICDEDTURKES** » August 20th, 2012, 11:11 am

Sloppy_Snood wrote:
BrentM wrote:What do you shoot I'm about to sell a Remington .665 that I bought in February at the convention
3" Hevi-13 2.0 oz.number 6s or 7s.
3.5" Hevi-13 2 1/4 oz. 6s or 7s
3" Winchester Extended Range 1 3/4 oz. number 6 or 7 shot.
3.5" Winchester Extended Range 2.0 oz. number 6 or 7 shot.
3" Winchester HV copper-plated lead 1 3/4 oz. 6s
3.5" Winchester HV copper-plated lead 2.0 oz. 6s
3" Winchester Double-X Magnum Turkey Loads (red hull) 2.0 oz. lead 6s
3.5" Winchester Double-X Magnum Turkey Loads (red hull) 2 1/4 oz. lead 6s
3" Spectra-Shot 1 5/8 oz. nickel-plated lead 6s

Is this some super duper top secret prototype

Turkey Talker · Post by **Turkey Talker** » August 20th, 2012, 11:30 am

Don, have you ever dipped any eotech/magnifiers? Can you make a custom dip if camo image is sent to you?

ArkansasDon · Post by **ArkansasDon** » August 20th, 2012, 11:40 am

Turkey Talker wrote:Don, have you ever dipped any eotech/magnifiers? Can you make a custom dip if camo image is sent to you?

Your talking the real deal Eo Techs?, not them copy cats huh? China made junk.I do alot of EoTech Magnifiers. I have a client, a PMC all he uses on his on his AR's are Tijicon ACOG's, EoTech's & their magnifiers with swing-a-way mounts on the magnifiers.

Sloppy_Snood · Post by **Sloppy_Snood** » August 20th, 2012, 12:25 pm

ICDEDTURKES wrote:Is this some super duper top secret prototype

Nope. This choke shoots all of the shotshells I listed quite well.

ICDEDTURKES · Post by **ICDEDTURKES** » August 20th, 2012, 12:27 pm

Sloppy_Snood wrote:
ICDEDTURKES wrote:Is this some super duper top secret prototype
Nope. This choke shoots all fo the shotshells I listed quite well.

Information on the Win 7s appreciated.. Do not make me bring Kowalsik here..

You remember that Scott.. Man that was probably the funniest prank I have ever played on these boards.

Sloppy_Snood · Post by **Sloppy_Snood** » August 20th, 2012, 12:34 pm

ICDEDTURKES wrote:Information on the Win 7s appreciated.. Do not make me bring Kowalsik here..

You remember that Scott.. Man that was probably the funniest prank I have ever played on these boards.

You and kowalski can't carry your own jockstrap (yet alone mine).

Thanks for the cutt&paste error alert. I fixed it.

Turkey Talker · Post by **Turkey Talker** » August 20th, 2012, 2:56 pm

ArkansasDon wrote:
Turkey Talker wrote:Don, have you ever dipped any eotech/magnifiers? Can you make a custom dip if camo image is sent to you?
Your talking the real deal Eo Techs?, not them copy cats huh? China made junk.I do alot of EoTech Magnifiers. I have a client, a PMC all he uses on his on his AR's are Tijicon ACOG's, EoTech's & their magnifiers with swing-a-way mounts on the magnifiers.

no its the real deal. $1000 sight with drop away magnifier. Im not into ACOG's or Aimpoint. FOV in an EOTech is why i use it. Plus i like the reticle better.
Its the least I could out on my $1600 RRA LAR-8 308 Elite Operator
can you do custom ideas (camo) I have been screwing with a tiger/desert camo design for awhile now and i sprayed an old rifle in it and it looked bad to the bone.

ArkansasDon · Post by **ArkansasDon** » August 20th, 2012, 7:48 pm

well, like to see what ya got, and what your aiming for. Their different options..........
heres a clients AR we done.

Its topped with ACOG & Trijicon RMR. The RMR is Moly Coated as the ACOG is dipped to match the rest of the camo. The RMR site is coated to match all the other Moly coated parts Dark Earth Tan Matte. This is a option. Note* notice the adjustable gas block & tube, their Moly Coated & the flash hidder?, their moly coated because of the supressor is factory coated Dark Earth too.
We do 40% tactical guns & 60% hunting guns & archery.
Had to black out Clients Company name for security & legal reasons.

GLS · Post by **GLS** » August 26th, 2012, 11:40 am

Don, I see where you coated the Trijicon RMR. How does it compare sizewise with the Burris FF series?

ArkansasDon · Post by **ArkansasDon** » August 26th, 2012, 2:07 pm

GLS wrote:Don, I see where you coated the Trijicon RMR. How does it compare sizewise with the Burris FF series?

No comparison, Burris FF is OK, but nothing to the RMR.

GLS · Post by **GLS** » August 26th, 2012, 2:30 pm

Don, thanks. Are they about the same size or is the RMR larger?

ArkansasDon · Post by **ArkansasDon** » August 26th, 2012, 2:52 pm

smaller & lighter

Gobbler Nation