SA-28 choke type

[huntinsomd]

I'm thinking about picking up a Mossberg SA-28 youth model for a turkey gun project and I'm curious as to which type of chokes fit this gun. Thanks

[Hoobilly]

Mobil

Indiancreek has 520-525 constriction for them

With the Foxtrotammo 28ga load it’s been a impressive lil gun. Just got mine in and will be patterning it after turkey seasons over

[huntinsomd]

Thanks!

[cutt down]

Indian Creek 525 as hoobilly said. Very Impressive! I tried Carlsons & they sent me a tube but it didn't fit until I removed the black oxide coating & they argued with me about the threads. It's a mobil choke thread per Mossberg & everyone else but for some reason Carlsons thinks different. I just sent it back & got a refund, ordered an Indian Creek & glad I did.

[huntinsomd]

Indian Creek 525 as hoobilly said. Very Impressive! I tried Carlsons & they sent me a tube but it didn't fit until I removed the black oxide coating & they argued with me about the threads. It's a mobil choke thread per Mossberg & everyone else but for some reason Carlsons thinks different. I just sent it back & got a refund, ordered an Indian Creek & glad I did.

Thanks!

[Luvbohuntin]

I received a IC 525 with Mobil threads and it doesn't fit, goes in about 2 threads. Called Mossberg and they said the SA-20 used the Mobil, but the SA-28 used the Huglu??? Any suggestions.

[Hoobilly]

I received a IC 525 with Mobil threads and it doesn't fit, goes in about 2 threads. Called Mossberg and they said the SA-20 used the Mobil, but the SA-28 used the Huglu??? Any suggestions.

They are wrong
Mine screwed in perfectly. I have sold approximately 10 of the 525 and like 5 of the 520 Mobil’s and they thread

One feller has to send a overly tight 520 back to have it touched up to thread correctly

[Luvbohuntin]

Thanks, I may just have to see if IC will send another to try.

[Hoobilly]

Thanks, I may just have to see if IC will send another to try.

You try any oil and turn by hand?

[Luvbohuntin]

Yes, it goes a couple threads and then it won't go any further

[batsonbe]

Yes, it goes a couple threads and then it won't go any further

You should call them, then Send it back to them with A note so they can correct it for you. IC makes some good chokes.

[cutt down]

I received a IC 525 with Mobil threads and it doesn't fit, goes in about 2 threads. Called Mossberg and they said the SA-20 used the Mobil, but the SA-28 used the Huglu??? Any suggestions.

Hmmm...I called Mossberg & they told me the 28ga used mobil choke! I had the same problem as you except with Carlsons & they argued with me about the threads. I worked the tube by hand a turn then lube then screw in then lube etc etc until I got the tube to seat. Had another tube that just wouldn't go in after 2 threads. Carlsons asked for the tubes back with full refund. Called Indian Creek & they sent me a tube. It works! It works great! I talked to them about the problem I had with Carlsons & they sent a tube for the SA-28. Like others said I'd call Indian Creek. They're good folks & will figure it out.

[Luvbohuntin]

Thanks everyone, I called them and they are working with me to get this straightened out. Great customer service.

[jsh909]

Was this ever resolved? According to multiple sources it sounds like there were a couple runs of these guns with both styles of threads. Some huglu and some Mobil

[Hoobilly]

Was this ever resolved? According to multiple sources it sounds like there were a couple runs of these guns with both styles of threads. Some huglu and some Mobil

All of the ones made in the last couple of years are Mobil

Mossberg SA28 is definitely the Mobil choke

[jsh909]

Thanks dude

[Luvbohuntin]

Yes they resolved the one I sent back. They had to cut the threads a little deeper, fits good now.