Hatfield 410 Patterns

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
Jstocks
Posts: 575
Joined: July 16th, 2017, 5:27 pm

Hatfield 410 Patterns

Post by Jstocks »

Finally got around to shooting the Hatfield single shot that I have put together. William did a fine job on the choke and FF mount.

This shot was at 40 yards with a 9 and 10 shot mix.
Last edited by Jstocks on February 28th, 2018, 9:58 am, edited 1 time in total.
Jstocks
Posts: 575
Joined: July 16th, 2017, 5:27 pm

Re: Hatfield 410 Patterns

Post by Jstocks »

Well,
Not sure why my pictures won't load up.

I had a pattern with 10's at 40 yards that had 168 in the 10" and couldn't count the 20" cause I was a lil off the cardboard I was shooting.
I had a 35 yard pattern with 9's that had 149 in the 10" and 94 in the 20"
BumbleFoot
Posts: 175
Joined: February 14th, 2017, 9:28 pm

Re: Hatfield 410 Patterns

Post by BumbleFoot »

I like those #s. Did William cut the barrel and thread it for a choke? If so, mind sharing more detail including cost?
Jstocks
Posts: 575
Joined: July 16th, 2017, 5:27 pm

Re: Hatfield 410 Patterns

Post by Jstocks »

William did cut the barrel and thread it. It's either 25" or 23" but I don't remember which. As far as cost, I don't feel comfortable posting on an open forum. Probably nothing wrong with it, but it just don't feel right.

Pm me for mor details. I can text pics of patterns.

I'm sure William could provide an accurate quote for any work.
reminex
Posts: 149
Joined: June 6th, 2015, 12:03 am

Re: Hatfield 410 Patterns

Post by reminex »

According to website cost to thread is 50 and believe choke was 70. This is consistent with my bill from him.
SumToy
Posts: 317
Joined: July 2nd, 2012, 8:39 am

Re: Hatfield 410 Patterns

Post by SumToy »

it is 115 to cut and thread then you have shipping on them. I know Midland has a gun out now that folks needs to look at.
reminex
Posts: 149
Joined: June 6th, 2015, 12:03 am

Re: Hatfield 410 Patterns

Post by reminex »

Still trying to find a midland. Everyone can get a 12 but no 20 or 410. The 20 comes threaded for Benelli mobile.
Post Reply

Return to “Small Bore”