SumToy 562-5 w/ T9s

Talk about 20, 16, & 28 gauge and .410 bore shotguns here.
Post Reply
User avatar
howl
Posts: 767
Joined: April 25th, 2013, 9:26 am
Location: Middle GA

SumToy 562-5 w/ T9s

Post by howl » January 23rd, 2018, 9:54 am

Anyone try 1 5/8oz with the 562-5?

yella yelper
Posts: 56
Joined: January 22nd, 2017, 7:04 pm

Re: SumToy 562-5 w/ T9s

Post by yella yelper » January 23rd, 2018, 1:06 pm

That's my setup out of an 870 youth 21" barrel. I was getting 353/162 in the 10"/20" which was too tight for my liking. Instead of getting a new choke, I loaded one with 6 slits in the wad instead of 4. That took it to 281/212 which was exactly what I was looking for. Hope this helps

yella yelper
Posts: 56
Joined: January 22nd, 2017, 7:04 pm

Re: SumToy 562-5 w/ T9s

Post by yella yelper » January 23rd, 2018, 1:16 pm

Here are the picsImageImage

Sent from my SAMSUNG-SM-G870A using Tapatalk


User avatar
howl
Posts: 767
Joined: April 25th, 2013, 9:26 am
Location: Middle GA

Re: SumToy 562-5 w/ T9s

Post by howl » January 23rd, 2018, 2:57 pm

Thanks.

User avatar
GLS
Gobbler Nation
Gobbler Nation
Posts: 2363
Joined: May 16th, 2012, 10:29 am
Location: Lowcountry, GA

Re: SumToy 562-5 w/ T9s

Post by GLS » January 23rd, 2018, 3:00 pm

Of the two single-shot Baikal MP-18's that William rigged for turkeys for me, the .5625 was all the choke this man needed. Pretty balanced numbers in the 10-20 ring and 10" at 40, mid to high 200's in both. Been sometime so I don't recall the exacts, but I was pleased. Gil

User avatar
howl
Posts: 767
Joined: April 25th, 2013, 9:26 am
Location: Middle GA

Re: SumToy 562-5 w/ T9s

Post by howl » January 23rd, 2018, 3:12 pm

Thanks.

User avatar
hoobilly
Gobbler Nation
Gobbler Nation
Posts: 4309
Joined: August 15th, 2011, 9:15 pm
Location: Argos Indiana

Re: SumToy 562-5 w/ T9s

Post by hoobilly » January 24th, 2018, 5:40 pm

Very nice patterns!

chipper
Posts: 72
Joined: May 2nd, 2016, 1:17 pm
Location: Camden Tn.

Re: SumToy 562-5 w/ T9s

Post by chipper » January 31st, 2018, 2:34 pm

That will do the job!

decoykrvr
Posts: 136
Joined: February 10th, 2015, 1:28 pm

Re: SumToy 562-5 w/ T9s

Post by decoykrvr » January 31st, 2018, 3:19 pm

With an 18 1/2" barrel on a Weatherby 459-TR I averaged 298 in the 10" and 200 in the 20" shooting 1 5/8oz, 9's w/ Sumtoy's. Shooting the same load w/ .555 Jeb's
resulted in blown loads averaging @250 in 10".

yella yelper
Posts: 56
Joined: January 22nd, 2017, 7:04 pm

Re: SumToy 562-5 w/ T9s

Post by yella yelper » January 31st, 2018, 3:48 pm

chipper wrote:That will do the job!
I can say definitively that, yes, it will do the job!

Swampchickin234
Posts: 127
Joined: January 28th, 2016, 2:49 pm

Re: SumToy 562-5 w/ T9s

Post by Swampchickin234 » January 31st, 2018, 4:11 pm

Yep I use one in 21” bbl 870. Average 296-300


Sent from my iPhone using Tapatalk

BrowningGuy88
Posts: 399
Joined: February 13th, 2013, 9:01 am

Re: SumToy 562-5 w/ T9s

Post by BrowningGuy88 » February 5th, 2018, 2:29 pm

I have shot it with my 21" 870 Youth and the 562-5. It averaged 250 in the 10 with T9's.

I'm running the 1-7/16 ounce load now and averaging 230-240 with T9's out of the same choke.

User avatar
howl
Posts: 767
Joined: April 25th, 2013, 9:26 am
Location: Middle GA

Re: SumToy 562-5 w/ T9s

Post by howl » February 5th, 2018, 3:53 pm

Thanks. I think I'll order a flush extra full. I'd as soon not have to use a sight.

Post Reply

Return to “Small Bore”

Who is online

Users browsing this forum: No registered users and 2 guests