.410 Yildiz, 370NM, with CompNChoke

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

.410 Yildiz, 370NM, with CompNChoke

Post by hawglips »

Here's a look at some patterns I've shot today with my Yildiz and a CompNChoke .385 (with my best Factory Full pattern of 10s thrown in for reference); my 370NM load.

40 yds, 10" and 10-20" numbers

10s Factory Full
Image

10s CompNChoke
Image
Image

9x10s (half and half) CompNChoke
Image
Image

9-1/2s CompNChoke
Image
Image

With the CompNChoke, here are the numbers broken down:

Total in 20", 2 shots
9-1/2s: 555
9x10s: 573
10s: 579

Average in 10", 2 shots
10s: 127.5
9x10s: 143.5
9-1/2s: 159.5

Average in 10-20", 2 shots

10s: 162
9x10s: 143
9-1/2s: 118

Averages per size, 2 shots

10s: 10" - 127.5
10s: 10-20" - 162

9x10s: 10" - 143.5
9x10s: 10-20" - 143

9-1/2s: 10" - 159.5
9-1/2s: 10-20" - 118

This load is going 1101 fps MV, so the 10s give 53.6 yds of 1.25" penetration, the 9-1/2s give 60.1 yds, and the 9s give 69.7 yds. It's about 2000 psi under SAAMI.

Given all that, which one would you shoot this fall if you were me?
2Shooter
Gobbler Nation
Gobbler Nation
Posts: 1230
Joined: January 6th, 2016, 9:18 pm
Location: North Georgia

Re: .410 Yildiz, 370NM, with CompNChoke

Post by 2Shooter »

I would go with the 9x10's or the 9 1/2's. Have you shot any of these loads at 50 yards? All of my patterns with the 13/16 oz load fall off about 60-65 percent at 50 yards. Steve
User avatar
Waddle Whacker
Gobbler Nation
Gobbler Nation
Posts: 2220
Joined: August 13th, 2012, 9:47 pm
Location: Louisiana

Re: .410 Yildiz, 370NM, with CompNChoke

Post by Waddle Whacker »

9x10
What is the 370NM? Is that a new load?
Feel, don't think. Trust your instincts.
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

Re: .410 Yildiz, 370NM, with CompNChoke

Post by hawglips »

Waddle Whacker wrote: August 27th, 2017, 2:25 pm 9x10
What is the 370NM? Is that a new load?
Yeah, that's a new one.
swampchicken
Posts: 664
Joined: March 17th, 2014, 7:12 pm
Location: Central Missouri

Re: .410 Yildiz, 370NM, with CompNChoke

Post by swampchicken »

9×10 seems impressive! Fall gobblers may not like that load!
swampchicken
Posts: 664
Joined: March 17th, 2014, 7:12 pm
Location: Central Missouri

Re: .410 Yildiz, 370NM, with CompNChoke

Post by swampchicken »

9×10 seems impressive! Fall gobblers may not like that load!
User avatar
Spuriosity
Gobbler Nation
Gobbler Nation
Posts: 2756
Joined: April 23rd, 2012, 10:12 pm
Location: Western North Carolina

Re: .410 Yildiz, 370NM, with CompNChoke

Post by Spuriosity »

Looks like 9x10s to me
User avatar
hawglips
Gobbler Nation
Gobbler Nation
Posts: 3794
Joined: July 7th, 2011, 9:58 pm
Contact:

Re: .410 Yildiz, 370NM, with CompNChoke

Post by hawglips »

I think it's unanimous on the 9x10s.....
Post Reply

Return to “Small Bore”