Shooters 1 5/8

Talk about 20, 16, & 28 gauge and .410 bore shotguns here.
Post Reply
User avatar
WV Ridge Reaper
Posts: 887
Joined: July 16th, 2014, 9:19 pm
Location: Some Where Deep In West By God Chasing A Turkey

Shooters 1 5/8

Post by WV Ridge Reaper » March 24th, 2017, 9:47 pm

Well with the warm weather I finally got to put some TSS threw some paper

Here a few pictures,I was lucky enough to take since the over pressure load didn't take me out...Should work for the hills and hollars and the occasional off the limb shot


Shot a IC 555 at 30&40 then a IC 562 at 40
Image

Image

Image



Sent from somewhere deep in West By God

Swampchickin234
Posts: 124
Joined: January 28th, 2016, 2:49 pm

Re: Shooters 1 5/8

Post by Swampchickin234 » March 25th, 2017, 12:03 am

That's smoking buddy.


Sent from my iPhone using Tapatalk

User avatar
guesswho
Gobbler Nation
Gobbler Nation
Posts: 3403
Joined: July 11th, 2011, 6:50 pm
Location: Bumpass VA, moving to Fuget KY

Re: Shooters 1 5/8

Post by guesswho » March 25th, 2017, 7:22 am

Leaves burnt orange holes in the paper. Yep, first indicator of a high pressure load.
Double Naught Spy!
RCD's Owner----------------Badonka Deke Prostaff
MoHo's Prostaff-------------Lighter Than HTL Shooter
The Storm Whistle Prostaff

pedro
Gobbler Nation
Gobbler Nation
Posts: 2056
Joined: June 6th, 2012, 8:21 am

Re: Shooters 1 5/8

Post by pedro » March 25th, 2017, 8:16 am

guesswho wrote:Leaves burnt orange holes in the paper. Yep, first indicator of a high pressure load.
Yep, orange hole = high p2

User avatar
redarrow
Gobbler Nation
Gobbler Nation
Posts: 5144
Joined: October 2nd, 2011, 8:26 am
Location: S E Michigan

Re: Shooters 1 5/8

Post by redarrow » March 25th, 2017, 9:01 am

Be careful son. Them HP loads might knock off heads on both ends.
Put you plans in the nail scarred hands.

User avatar
Dr Juice
Posts: 18
Joined: March 17th, 2017, 6:05 am

Re: Shooters 1 5/8

Post by Dr Juice » March 25th, 2017, 8:06 pm

Simply brutal! Congrats.

Deom
Posts: 11
Joined: March 14th, 2017, 12:48 pm

Re: Shooters 1 5/8

Post by Deom » March 27th, 2017, 11:34 am

Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
Woodhaven Custom Calls
Ol' Tom

drenalinld
Gobbler Nation
Gobbler Nation
Posts: 1346
Joined: December 10th, 2011, 8:37 pm

Re: Shooters 1 5/8

Post by drenalinld » March 27th, 2017, 12:30 pm

Deom wrote:Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
I think mine fit flush. I will screw it in a little later today and get you a pic.

User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 1171
Joined: May 13th, 2013, 5:25 pm
Location: southern onio

Re: Shooters 1 5/8

Post by Turkinator » March 27th, 2017, 12:48 pm

Deom wrote:Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
Tiny gap in mine. Almost unnoticed

User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 1171
Joined: May 13th, 2013, 5:25 pm
Location: southern onio

Re: Shooters 1 5/8

Post by Turkinator » March 27th, 2017, 12:51 pm

Dr Juice wrote:Simply brutal! Congrats.
brutal on turkeys too!!!!

taylorjones20
Posts: 122
Joined: March 6th, 2015, 11:17 pm
Location: Beech Bluff, TN

Re: Shooters 1 5/8

Post by taylorjones20 » March 27th, 2017, 1:34 pm

Deom wrote:Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
Yep. I've noticed it on my M2 and also a browning maxus, and browning gold.

User avatar
vaturkey
Gobbler Nation
Gobbler Nation
Posts: 3478
Joined: June 27th, 2011, 9:54 pm

Re: Shooters 1 5/8

Post by vaturkey » March 27th, 2017, 1:53 pm

Small slight gap on mine also with IC choke . Wont hurt a thing as long as you got it screwed all the way in ! :thumbup:

turkey_slayer
Posts: 659
Joined: February 14th, 2013, 10:06 am

Re: Shooters 1 5/8

Post by turkey_slayer » March 27th, 2017, 2:29 pm

Deom wrote:Does anybody else that is shooting an M2 with an IC choke have a gap between the end of the barrel and the choke? I expect a little gap to show that the choke is seated, but the gap on mine is right at an 1/8" and it just looks like crap.
Yep small gap. As long as it mates up inside you're all good

decoykrvr
Posts: 123
Joined: February 10th, 2015, 1:28 pm

Re: Shooters 1 5/8

Post by decoykrvr » March 27th, 2017, 4:46 pm

If there is a slight gap double up on the thread grease esp. at the bottom of the tube which will mitigate the potential erosion/corrosion caused by the hot gasses.

User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 1171
Joined: May 13th, 2013, 5:25 pm
Location: southern onio

Re: Shooters 1 5/8

Post by Turkinator » March 27th, 2017, 5:35 pm

The gap is not where the choke mates with the bore or you would have a yuge problem. It's where the choke seats on the end of the barrel

User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 1171
Joined: May 13th, 2013, 5:25 pm
Location: southern onio

Re: Shooters 1 5/8

Post by Turkinator » March 27th, 2017, 5:38 pm

This
Attachments
20170327_173609.jpg

Deom
Posts: 11
Joined: March 14th, 2017, 12:48 pm

Re: Shooters 1 5/8

Post by Deom » March 27th, 2017, 6:58 pm

Turkinator wrote:This
Yeah mine is worse than that. The packaging says gaps are allowed up to 1/32. Mine is right at an 1/8". I wish I knew how to post a dang picture on here.
Woodhaven Custom Calls
Ol' Tom

pullit
Gobbler Nation
Gobbler Nation
Posts: 1204
Joined: June 27th, 2012, 12:58 pm
Location: Middle/West TN

Re: Shooters 1 5/8

Post by pullit » March 28th, 2017, 7:55 am

Thank God your ok from shooting those,......but good patterns.....:-)
I may not be smart but I can lift heavy objects

I have no need for a 30-06, I have a shotgun

fountain
Posts: 383
Joined: August 17th, 2012, 11:25 pm

Re: Shooters 1 5/8

Post by fountain » March 29th, 2017, 5:50 am

What load were you shooting that was over pressured? What was the psi?

SumToy
Posts: 261
Joined: July 2nd, 2012, 7:39 am

Re: Shooters 1 5/8

Post by SumToy » March 29th, 2017, 9:26 am

that is not a problem if a small gap.(not 1/8) That just lets you know they are bottom out on inside of the barrel. Ours do the same.

Post Reply

Return to “Small Bore”

Who is online

Users browsing this forum: No registered users and 2 guests