benelli m1 20ga

Talk about 20 28 gauge & .410 bore shotguns here.
Post Reply
User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 3006
Joined: May 13th, 2013, 6:25 pm
Location: southern onio

benelli m1 20ga

Post by Turkinator »

Any opinions on a benelli m1 20ga? Found a used camo with 26in barrel for 800$
User avatar
DocHolliday
Posts: 519
Joined: April 18th, 2012, 1:46 pm
Location: Louisiana

Re: benelli m1 20ga

Post by DocHolliday »

Great gun! Mine likes 1-13/16 oz T9.
NRA Benefactor Life Member
User avatar
ICDEDTURKES
Gobbler Nation
Gobbler Nation
Posts: 8591
Joined: July 8th, 2011, 10:27 am

Re: benelli m1 20ga

Post by ICDEDTURKES »

Great gun sounds like a good price.. I have a friend that bought two M1 20s when they were discontinued they were closed out for 750.. Funny thing his are M1s not M2 Americans and they have Crio Chokes. :scratch:
User avatar
Shooter
Gobbler Nation
Gobbler Nation
Posts: 5488
Joined: April 19th, 2012, 1:29 pm
Location: Deep South, Middle, TN

Re: benelli m1 20ga

Post by Shooter »

We have one, and it will stay in this family, to the grave!
User avatar
Turkinator
Gobbler Nation
Gobbler Nation
Posts: 3006
Joined: May 13th, 2013, 6:25 pm
Location: southern onio

Re: benelli m1 20ga

Post by Turkinator »

What choke do they seem to like with tss9
User avatar
Hoobilly
Gobbler Nation
Gobbler Nation
Posts: 13403
Joined: August 15th, 2011, 10:15 pm
Location: Argos Indiana
Contact:

Re: benelli m1 20ga

Post by Hoobilly »

ICDEDTURKES wrote:Great gun sounds like a good price.. I have a friend that bought two M1 20s when they were discontinued they were closed out for 750.. Funny thing his are M1s not M2 Americans and they have Crio Chokes. :scratch:
I bet they were mid year change over guns and only had the crio barrels left in stock to make complete guns.


I love my M2 20ga

uses 2 different tubes

Indian Creeks in .555 and .562

TSS does well with both
Hevishot likes the .555
Fed HW7 does well with the .562
Don't start none, won't be none!

https://foxtrotammo.com/
User avatar
DocHolliday
Posts: 519
Joined: April 18th, 2012, 1:46 pm
Location: Louisiana

Re: benelli m1 20ga

Post by DocHolliday »

I shoot factory full
NRA Benefactor Life Member
User avatar
britton40
Posts: 101
Joined: April 4th, 2013, 4:52 pm

benelli m1 20ga

Post by britton40 »

Bump. Just bought a M1 Super 90 20 ga. Gonna start with a trulock 565 ext non ported. Any other suggestions? Looking for around a 60-40 pattern in the 10"-20" at 40 yards with TSS 9.5s.
Last edited by britton40 on January 11th, 2016, 5:23 pm, edited 1 time in total.
User avatar
el diablo
Gobbler Nation
Gobbler Nation
Posts: 1268
Joined: June 28th, 2012, 12:37 am

Re: benelli m1 20ga

Post by el diablo »

The Indian Creek .562 throws good pattern in my M2 with the 1 5/8oz load. Probably work similar in you M1 even with different threads.
.555 would probably put up crazy numbers with the 9.5's.
User avatar
killerstump
Gobbler Nation
Gobbler Nation
Posts: 1228
Joined: January 8th, 2014, 4:15 pm

benelli m1 20ga

Post by killerstump »

I need a ic555


Sent from my iPhone using Tapatalk
User avatar
hookedspur
Gobbler Nation
Gobbler Nation
Posts: 2371
Joined: May 24th, 2012, 8:44 pm
Location: Ohio

Re: benelli m1 20ga

Post by hookedspur »

el diablo wrote:The Indian Creek .562 throws good pattern in my M2 with the 1 5/8oz load. Probably work similar in you M1 even with different threads.
.555 would probably put up crazy numbers with the 9.5's.


This is what I use in my M2
If my grand Daughter is shooting (562)
555 if I'm up.
User avatar
britton40
Posts: 101
Joined: April 4th, 2013, 4:52 pm

benelli m1 20ga

Post by britton40 »

hookedspur wrote:
el diablo wrote:The Indian Creek .562 throws good pattern in my M2 with the 1 5/8oz load. Probably work similar in you M1 even with different threads.
.555 would probably put up crazy numbers with the 9.5's.


This is what I use in my M2
If my grand Daughter is shooting (562)
555 if I'm up.
Thanks doc!
User avatar
hookedspur
Gobbler Nation
Gobbler Nation
Posts: 2371
Joined: May 24th, 2012, 8:44 pm
Location: Ohio

Re: benelli m1 20ga

Post by hookedspur »

britton40 wrote:
hookedspur wrote:
el diablo wrote:The Indian Creek .562 throws good pattern in my M2 with the 1 5/8oz load. Probably work similar in you M1 even with different threads.
.555 would probably put up crazy numbers with the 9.5's.


This is what I use in my M2
If my grand Daughter is shooting (562)
555 if I'm up.
Thanks doc!

I'm not Doc but that's ok ,I have hunted with him and he is a fine fellow !
I take no offence :D He is Hookspur and I am hookedspur
User avatar
britton40
Posts: 101
Joined: April 4th, 2013, 4:52 pm

benelli m1 20ga

Post by britton40 »

Noted!
DC1.
Posts: 236
Joined: June 28th, 2012, 12:58 pm

Re: benelli m1 20ga

Post by DC1. »

I have a M1 and M2. M1 with rhino .575 TSS 9's in 10" circle 325/130. M2 Factoy full in 10" circle with TSS 9's 275/180. M2 with Indian Creek .555 in 10" circle with TSS 9'S was around 190, didn't count what was in the 20" on the shots with the IC choke. I prefer the M1 HANDS DOWN TO THE M2!!!
User avatar
britton40
Posts: 101
Joined: April 4th, 2013, 4:52 pm

benelli m1 20ga

Post by britton40 »

DC1. wrote:M1 with rhino .575 TSS 9's in 10" circle 325/130
Wow. Strong.
User avatar
01Foreman400
Posts: 431
Joined: March 4th, 2013, 3:33 pm

Re: benelli m1 20ga

Post by 01Foreman400 »

DC1. wrote:M2 with Indian Creek .555 in 10" circle with TSS 9'S was around 190
That combo should be putting up 290's-300's with a 1 5/8 oz. load?
User avatar
britton40
Posts: 101
Joined: April 4th, 2013, 4:52 pm

benelli m1 20ga

Post by britton40 »

Do you have to use the 2 3/4" load in the M1?
User avatar
01Foreman400
Posts: 431
Joined: March 4th, 2013, 3:33 pm

Re: benelli m1 20ga

Post by 01Foreman400 »

britton40 wrote:Do you have to use the 2 3/4" load in the M1?
That's what was recommended to me. I know guys that shoot the 3" and have problems and a couple that don't have any issues. I didn't see the reason to chance it. The 2 3/4" loads do great.
DC1.
Posts: 236
Joined: June 28th, 2012, 12:58 pm

Re: benelli m1 20ga

Post by DC1. »

01Foreman400 wrote:
DC1. wrote:M2 with Indian Creek .555 in 10" circle with TSS 9'S was around 190
That combo should be putting up 290's-300's with a 1 5/8 oz. load?
Thats what i thought but, it would never get any better. I sold the choke, it's not any better in the other gun....
ehgbyf
Posts: 202
Joined: March 21st, 2014, 10:10 am
Location: Birmingham, Alabama

Re: benelli m1 20ga

Post by ehgbyf »

Call Indian creek and tell them you are shooting tss and they will send you the choke. I had a .555 but the one they sent me after I mentioned tss shoots better.
Gunslinger1
Posts: 34
Joined: January 2nd, 2016, 4:05 pm
Location: Rolla, MO

Re: benelli m1 20ga

Post by Gunslinger1 »

ehgbyf wrote:Call Indian creek and tell them you are shooting tss and they will send you the choke. I had a .555 but the one they sent me after I mentioned tss shoots better.

What did they send you?
User avatar
britton40
Posts: 101
Joined: April 4th, 2013, 4:52 pm

benelli m1 20ga

Post by britton40 »

I shot the 565 non ported trulock, 570 ported pure gold, and a 575 Carlson's. The pure gold had the hottest core. I settled on the 575 Carlson's ext non ported.
Post Reply

Return to “Small Bore”