Indian Creek

Talk about 10 & 12 gauge shotguns here.
Post Reply
TNHunter61
Posts: 28
Joined: March 29th, 2016, 4:59 pm

Indian Creek

Post by TNHunter61 » February 5th, 2018, 11:32 am

About to getting an Indian Creek choke tube for my 12 ga 870 Remington it has a 23 inch barrel and I will be shooting 2/1/4 oz 8 and 9 combo tss loads. I am looking for the tightest pattern The most pellets in the 10 inch circle that I can get. What restriction would you guys recommend! Their web sight says they make a .665 but other restrictions are available ! Thanks

taylorjones20
Posts: 200
Joined: March 6th, 2015, 11:17 pm
Location: Beech Bluff, TN

Re: Indian Creek

Post by taylorjones20 » February 6th, 2018, 11:10 am

The .665 should get you a great pattern! It will be tight with TSS!

User avatar
turkeyinstrut
Posts: 688
Joined: April 13th, 2016, 11:32 am

Re: Indian Creek

Post by turkeyinstrut » February 6th, 2018, 11:45 am

A IC .665 is what I shot in my 11-87 Super Mag, I was shooting 2 oz. of 9's and 1/2 oz. of 8's and it shot outstanding but have now gone to a 20 ga. :D

norINhunter
Posts: 66
Joined: April 11th, 2016, 11:27 am

Re: Indian Creek

Post by norINhunter » February 7th, 2018, 3:44 pm

I'm sure other less expensive options like carlsons or a hs strut undertaker would be more than adequate. But I like Indian Creek.

User avatar
hoobilly
Gobbler Nation
Gobbler Nation
Posts: 5548
Joined: August 15th, 2011, 9:15 pm
Location: Argos Indiana

Re: Indian Creek

Post by hoobilly » February 8th, 2018, 2:29 pm

Not sure on the combo how it will shoot with a 665

it might be tight, possibly blown pattern and may actually need a hair more open.

Looking forward to hearing how it shoots for you

Fl strutter
Posts: 218
Joined: April 26th, 2017, 6:23 pm
Location: Jasper, Florida

Re: Indian Creek

Post by Fl strutter » February 8th, 2018, 2:38 pm

I'm shooting 12 gauge 870 supermag 20 inch barrel and 2.5 oz of 8.5s.

Here's 665 Indian creek
https://photos.app.goo.gl/QaAMi6WHMVocDEw83

Here's 670 Indian creek
https://photos.app.goo.gl/i9vQu5rda7zIhwcO2

I wish I had a 675 or 680 to get a little more in 20 inch. The 670 was more even so that's what I'm shooting. I tried carlsons and rem chokes from 665 to 680 but patterns were not good at all and not consistent. The Indian creek chokes are very very consistent. Hope this helps.

TNHunter61
Posts: 28
Joined: March 29th, 2016, 4:59 pm

Re: Indian Creek

Post by TNHunter61 » February 9th, 2018, 8:36 pm

Thanks, FI strutter ! I ordered one today, thats a pattern like I have Ben trying to get!

Fl strutter
Posts: 218
Joined: April 26th, 2017, 6:23 pm
Location: Jasper, Florida

Re: Indian Creek

Post by Fl strutter » February 10th, 2018, 4:46 am

No problem what did you get. I ordered a 675 from them today also gonna try to get a few more in the 20 inch. Can't wait to stone one with my own loads.

TNHunter61
Posts: 28
Joined: March 29th, 2016, 4:59 pm

Re: Indian Creek

Post by TNHunter61 » February 10th, 2018, 2:00 pm

A .665. I shot tss last year in 3 inch 2 oz. with a rhino choke in a .660. Done great I really don’t know if a person needs any more than that ! But It does not do as good with the heaver loads. Just wanted to see what the capabilities are. Thanks

Post Reply

Return to “Big Bore”

Who is online

Users browsing this forum: No registered users and 3 guests