Search found 2757 matches
- May 1st, 2023, 9:39 am
- Forum: Gobbler Talk
- Topic: Pop, Pop, Boom.
- Replies: 9
- Views: 3659
Pop, Pop, Boom.
This season, my first two birds fell to the “pop” of my Yildiz single-shot TK36 .410 shooting brass loaded with 13/16 oz. of TSS #9.5. A friend and I have through patterning and experience noted that this old subsonic load from Hal Abbott patterns better than his faster, heavier loads in our guns, b...
- April 25th, 2023, 2:20 pm
- Forum: Equipment/Product Reviews
- Topic: How Much Permethrin To Use?
- Replies: 10
- Views: 3744
Re: How Much Permethrin To Use?
Spray up. These aren't your grandfather's ticks anymore. A friend almost died after a tick bite spending a week in the hospital. BIL developed Lymes after working on a remote barrier island off the coast years ago. He was constantly dealing with ticks. Gil
- April 25th, 2023, 6:46 am
- Forum: Huntin Tales
- Topic: Tagged out in WV
- Replies: 6
- Views: 1975
Re: Tagged out in WV
The M37 in 28 ga. sure is a sweet shooting gun. There aren't that many of them. Congratulations. Gil
- April 19th, 2023, 10:25 am
- Forum: Gobbler Talk
- Topic: Quickest hunt
- Replies: 19
- Views: 5487
Re: Quickest hunt
You understand that down the road, there will be a high cost for today. Past consideration doesn't count. Congratulations. Gil
- April 18th, 2023, 2:22 pm
- Forum: Gobbler Talk
- Topic: Shot Removal after the Kill
- Replies: 7
- Views: 1447
Re: Shot Removal after the Kill
After skinning the breast out, I look for shot holes. If there are some visible, I lay the breast in this jerky board, which has two depths. with the small board, I pressure downwards and use the knife to run through the breast with the knife slicing along the top of the jerky board and repeat as ma...
- April 17th, 2023, 4:40 pm
- Forum: Gun Talk
- Topic: Replacing battery on FFIII @#$%
- Replies: 14
- Views: 3066
Re: Replacing battery on FFIII @#$%
A Duracell 1632 is the same size as any other 1632. The OG threads attached to Hognutz post shows the confusion arising when one doesn't realize that the battery cover doesn't appear to be level after fully screwing it down. The muzzle side of the lid is flush while the stock side of the lid isn't; ...
- April 17th, 2023, 10:37 am
- Forum: Gun Talk
- Topic: Replacing battery on FFIII @#$%
- Replies: 14
- Views: 3066
Re: Replacing battery on FFIII @#$%
Earlier version required removal of sight to change battery. FFIII remains in place and battery is removed from the top of the unit, not the bottom as in previous versions. Why Duracell? Longer shelf life--10 years (claimed). I bought a cheap pack off Amazon and carried a spare in my pack. Billy's b...
- April 16th, 2023, 11:26 am
- Forum: Gun Talk
- Topic: Replacing battery on FFIII @#$%
- Replies: 14
- Views: 3066
Replacing battery on FFIII @#$%
Here's the easy way to do it. Use the widest flat tipped screwdriver that will fit into the slot. Problem with smaller blades is that the lid tips in the slot's direction, side to side, preventing thread full engagement. Don't even think of using the screwdriver that comes with the red dot. Use it f...
- April 8th, 2023, 9:22 am
- Forum: Small Bore
- Topic: Hull trimmer for 20 gauge
- Replies: 10
- Views: 1142
Re: Hull trimmer for 20 gauge
I agree. Simpler the better and less $$$. it's not as if we are loading shells for a barn burner dove shoot. Gil
- April 7th, 2023, 6:08 pm
- Forum: Small Bore
- Topic: Hull trimmer for 20 gauge
- Replies: 10
- Views: 1142
Re: Hull trimmer for 20 gauge
If you had posted on the handloading forum you might have seen how to make one out of a dowel and exacto blade. Lots of good info there. The link is a "sticky".
viewtopic.php?t=16241
viewtopic.php?t=16241
- April 6th, 2023, 12:23 pm
- Forum: Big Bore
- Topic: Rem. 870 Express 12 ga. Super Mag
- Replies: 11
- Views: 2762
Re: Rem. 870 Express 12 ga. Super Mag
I just found the rem. turkey xtra full lead only that came with it. that answers my own question. Gil
- April 6th, 2023, 12:13 pm
- Forum: Big Bore
- Topic: Rem. 870 Express 12 ga. Super Mag
- Replies: 11
- Views: 2762
Rem. 870 Express 12 ga. Super Mag
I'm giving to the son of family friends my Super Mag. He's taken an interest in turkey hunting. My generosity doesn't extent to loading TSS for him. ;) What readily available choke (don't even suggest the most expensive ones) would one suggest to shoot, gag, Win. Longbeards?? I figure that's the lea...
- April 6th, 2023, 10:59 am
- Forum: Bust N Beaks
- Topic: First of 2023
- Replies: 18
- Views: 2725
Re: First of 2023
Great start! Gil
- April 5th, 2023, 11:21 am
- Forum: Gobbler Talk
- Topic: River Bird
- Replies: 8
- Views: 1081
Re: River Bird
Yes, it's brass. In that particular gun, brass works better than plastic. Others have found the reverse to be true in their guns. Gil
viewtopic.php?p=133295&hilit=heavy+metal#p133295
viewtopic.php?p=133295&hilit=heavy+metal#p133295
- April 5th, 2023, 8:35 am
- Forum: Gobbler Talk
- Topic: River Bird
- Replies: 8
- Views: 1081
River Bird
Last Sunday I went to a bird which was the nearest of three I heard at first light, and I estimated 400 yards to him in the tree. At 200 yards, I ran into water. River was into the woods and he was closer to the other side than to my side. I backed out and looked for one of the other birds. All stop...
- March 29th, 2023, 6:50 am
- Forum: Fox Trot Ammo
- Topic: What is considered a good pattern density?
- Replies: 12
- Views: 2366
Re: What is considered a good pattern density?
Minimum of 100 pellets in 10" circle at 40 and 60 yards. Assuming sufficient velocity, the 70% rule would require 200 at 40, 140 at 50 and 98 at 60. Of course one would have more than 200 at 40 with the "Y?" load. At 60 yards with a perfectly centered head/neck shot expect shot in the...
- March 27th, 2023, 2:23 pm
- Forum: Fox Trot Ammo
- Topic: Worlds Smallest Turkey Gun
- Replies: 20
- Views: 5688
Re: Worlds Smallest Turkey Gun
A seemingly endless roll of construction paper is available from HD for about $10. I use wooden clothes pins to attach it to a steel banjo real estate sign. Plenty wide to capture the entire pattern. Gil
- March 26th, 2023, 4:57 pm
- Forum: Call Makers
- Topic: What wood for box call for SE
- Replies: 18
- Views: 5653
Re: What wood for box call for SE
When you make of list of callmakers that Neil Cost had a direct influence, you need to include Albert Paul. Albert Paul's box calls are as fine as any box call you will ever take into the turkey woods. I had a nice Paul "Henry Davis" holly short box, smaller than a standard Cost or Lamar ...
- March 25th, 2023, 8:16 am
- Forum: Call Makers
- Topic: What wood for box call for SE
- Replies: 18
- Views: 5653
Re: What wood for box call for SE
Neil Cost would often cut red cedar from standing dead trees on a friend's property near Edgefield, SC. I have a box made by Lamar Williams 20 years ago made from poplar with a walnut lid. Cost mentored him in addition to several other call makers here in the SE. My earliest Cost call is all cedar c...
- March 24th, 2023, 8:07 am
- Forum: Call Makers
- Topic: What wood for box call for SE
- Replies: 18
- Views: 5653
Re: What wood for box call for SE
Neil Cost used several different woods: Cedar, poplar, butternut. He often used a walnut striker for these woods, but also the same wood the box was made. He also used cypress, but not as much as he used poplar. Gil
- March 23rd, 2023, 4:10 pm
- Forum: Small Bore
- Topic: Need help with roll crimper for 410
- Replies: 17
- Views: 3053
Re: Need help with roll crimper for 410
I loaded up 3 for tomorrow checking zero and first day in the woods. Note the crimper. It is clamped to the end of a board. With my knee pressed against the board pushing it into the coffee table, with my left hand clamping the board and the rto's lever to raise the shell against the crimper, I hand...
- March 23rd, 2023, 6:28 am
- Forum: Small Bore
- Topic: Need help with roll crimper for 410
- Replies: 17
- Views: 3053
Re: Need help with roll crimper for 410
I second the recommendatio from the reloader's network. A buddy uses one for 10 gauge and it makes a great crimp. It's a 4 pin head. I don't know about the .410 but I've seen the one my buddy has and its well made and solid. I second the use of a vintage hand cranker. Only new ones I've had were fro...
- March 22nd, 2023, 2:34 pm
- Forum: Gun Talk
- Topic: .410 cleaning and polishing
- Replies: 14
- Views: 978
Re: .410 cleaning and polishing
Some like it clean, some like it dirty. It doesn't make that much difference in my guns. Gil
- March 21st, 2023, 5:37 pm
- Forum: Fox Trot Ammo
- Topic: Worlds Smallest Turkey Gun
- Replies: 20
- Views: 5688
Re: Worlds Smallest Turkey Gun
The discussion of changing POA/POI is a sure fire way for some to burn up ammo unnecessarily especially "counting clicks". There is no reason one should have to shoot 4 dove loads in zeroing in a shotgun. As has been discussed here by some, an easier method involves a steady, repeatable re...
- March 21st, 2023, 4:40 pm
- Forum: Fox Trot Ammo
- Topic: Worlds Smallest Turkey Gun
- Replies: 20
- Views: 5688
Re: Worlds Smallest Turkey Gun
My former Super Bantam did fine with a PG .570. Only other I tried was the factory choke and a PG .555 but the .570 performed best with Hal's 3" 1 5/8 load.
I gave it to my buddy's granddaughter and she loves it.
Gil
I gave it to my buddy's granddaughter and she loves it.
Gil