Search found 47 matches
- February 21st, 2018, 6:54 pm
- Forum: Gun Talk
- Topic: Over Choking Tungsten Causing Barrel Damage?
- Replies: 21
- Views: 14534
Re: Over Choking Tungsten Causing Barrel Damage?
Sloppy, Do you have a good explination as to why the resin works so well for Winchester? Does it keep the lead pellets from deforming? Or does it actually hold the shot column together long enough to make a difference? Seems like it would just shatter, turning into buffer, as soon as it passes thro...
- February 14th, 2018, 4:06 pm
- Forum: Gun Talk
- Topic: Federal TSS - Just thinking outloud...
- Replies: 25
- Views: 67448
Re: Federal TSS - Just thinking outloud...
Too bad they used that flight control wad. Doesn't make sense why they would use it for this application but whatever I won't be shooting them.
- February 12th, 2018, 9:36 pm
- Forum: Gun Talk
- Topic: Remington declaring bankruptcy?
- Replies: 17
- Views: 4462
Re: Remington declaring bankruptcy?
There's a reason they call private equity groups "corporate raiders" because they come in and acquire a company pile on the debt take the profits then when the debt load finally breaks the company's back file for bankruptcy and sell of the product lines at a premium. Fortunately it's Remin...
- February 7th, 2018, 3:44 pm
- Forum: Big Bore
- Topic: Indian Creek
- Replies: 8
- Views: 5489
Re: Indian Creek
I'm sure other less expensive options like carlsons or a hs strut undertaker would be more than adequate. But I like Indian Creek.
- February 7th, 2018, 2:13 pm
- Forum: Big Bore
- Topic: Browning Gold NWTF 12ga
- Replies: 7
- Views: 4036
Re: Browning Gold NWTF 12ga
I ordered a .675 IC for my sx3 and looking to see what that does for the 10-20". I really like the distribution of yours. Thanks, I think it will be a good hunting pattern not for numbers though! It'll be more than good you basically have a 10" horizontal margin left or right of your aim ...
- February 7th, 2018, 9:49 am
- Forum: Big Bore
- Topic: Browning Gold NWTF 12ga
- Replies: 7
- Views: 4036
Re: Browning Gold NWTF 12ga
I ordered a .675 IC for my sx3 and looking to see what that does for the 10-20". I really like the distribution of yours.
- February 5th, 2018, 1:54 pm
- Forum: Small Bore
- Topic: Mossberg SA-20 build finished
- Replies: 15
- Views: 5493
Re: Mossberg SA-20 build finished
Looks awesome.
- January 25th, 2018, 8:04 am
- Forum: Gun Talk
- Topic: Indian Creek - M2 20g help
- Replies: 12
- Views: 4163
Re: Indian Creek - M2 20g help
Mine does the same, let er rip.
- May 5th, 2017, 9:43 am
- Forum: Gobbler Talk
- Topic: New Guy from Ontario
- Replies: 6
- Views: 1922
Re: New Guy from Ontario
Great job congrats. Wish my dad taught me about turkey hunting. The closest I got to turkey hunting as a kid was strolling down the frozen food aisle at the grocery store.
- May 2nd, 2017, 8:34 am
- Forum: Gobbler Talk
- Topic: Finally
- Replies: 9
- Views: 2876
Re: Finally
That had to be a fun hunt!!! From the full tail fan I don't believe that is a jake!!! WTG :thumbup: :thumbup: Thanks, from my long winded novel I guess I didn't clarify there were two birds that came in at first I only saw the jake being we are in Indiana I'm not burning the one and only tag on a s...
- May 2nd, 2017, 8:24 am
- Forum: Gobbler Talk
- Topic: Finally
- Replies: 9
- Views: 2876
Re: Finally
That had to be a fun hunt!!! From the full tail fan I don't believe that is a jake!!! WTG :thumbup: :thumbup: Thanks, from my long winded novel I guess I didn't clarify there were two birds that came in at first I only saw the jake being we are in Indiana I'm not burning the one and only tag on a s...
- May 1st, 2017, 3:38 pm
- Forum: Gobbler Talk
- Topic: Finally
- Replies: 9
- Views: 2876
Finally
My cousin and I started hunting turkeys 9 yrs ago together and I've been fortunate enough to harvest turkeys and dedicate an above average amount of time to hunting these awesome animals. With that being said my cousin has an incredibly busy schedule and for a good season he gets to go out three tim...
- April 20th, 2017, 4:20 pm
- Forum: Big Bore
- Topic: Winchester SX3 and TSS
- Replies: 9
- Views: 5067
Re: Winchester SX3 and TSS
Open it up! You need about 70/ 80 of those 10 inch hits in the 20. It'd still be tight enough to kill em as far as TSS will kill, and you'll kill more close birds/birds you would otherwise whiff at because of a rushed shot. I shoot a browning trap special, in my Sx3. It's open at close ranges and a...
- April 18th, 2017, 8:43 pm
- Forum: Big Bore
- Topic: Winchester SX3 and TSS
- Replies: 9
- Views: 5067
Re: Winchester SX3 and TSS
Got to test one last time before season gets under way in a week. Packed it down better before crimping no longer getting shot rattling around. Really happy with it and the 10-20" ring saw a 10% improvement.
- April 7th, 2017, 6:39 pm
- Forum: Gobbler Talk
- Topic: Afternoon Double in MS
- Replies: 15
- Views: 6218
Re: Afternoon Double in MS
Looks like two awesome birds. Great Job
- April 5th, 2017, 9:30 pm
- Forum: Gobbler Talk
- Topic: SW TN Opener
- Replies: 12
- Views: 4161
Re: SW TN Opener
McNairy Co. had my first slug burger at the triple nipple or buttery nipple can't remember the name by Pickwick Dam.Andy S. wrote:Congrats! You were in my neck of the woods, what county were you in, or small town were you close to?
- April 3rd, 2017, 10:50 pm
- Forum: Gobbler Talk
- Topic: SW TN Opener
- Replies: 12
- Views: 4161
SW TN Opener
Was able to make it down to TN for the opener. We had a couple roosted Friday evening but like most initial plans they don't usually work out. My buddy swore he heard one a few hundred yards north of us in another patch of woods so we slid over to inspect and when we called (we played the hot hen ta...
- March 30th, 2017, 1:40 pm
- Forum: Big Bore
- Topic: Winchester SX3 and TSS
- Replies: 9
- Views: 5067
Re: Winchester SX3 and TSS
Awesome pattern!!! But a little more wiggle room up close would be good. Somewhere around 250-275 in the 20" :thumbup: I'd like to open it up a hair but at this point I'll run with it and go. Where I do a majority of my hunting (field edges etc. we don't have very large tracts of timber) it sh...
- March 28th, 2017, 8:44 am
- Forum: Big Bore
- Topic: Winchester SX3 and TSS
- Replies: 9
- Views: 5067
Winchester SX3 and TSS
Finally got a chance to put some on paper. Shot three chokes factory full, patternmaster black cloud full .690, and IC .665. Factory full and pm weren't ideal it had a nice consistent spread but wasn't quite what I was looking for. However my IC.665 was pretty nasty. Did 385 in 10" and 200 plus...
- March 13th, 2017, 8:11 am
- Forum: Calling & Competition Calling
- Topic: Slate Call Recommendations
- Replies: 13
- Views: 6578
Re: Slate Call Recommendations
Thanks for the feedback guys. I placed an order this morning for a Matt McClain maple pot with slate. Hopefully he likes it more than his Primos Jackpot.
- March 10th, 2017, 4:33 pm
- Forum: Calling & Competition Calling
- Topic: Slate Call Recommendations
- Replies: 13
- Views: 6578
Slate Call Recommendations
Looking for feedback on a good slate call. Want to buy one for my buddy who host me every year down in TN as a token of appreciation.
- April 28th, 2016, 8:10 am
- Forum: Gobbler Talk
- Topic: 2016 Gobbler Nation Kill Thread
- Replies: 90
- Views: 23983
2016 Gobbler Nation Kill Thread
Who: norINhunter Date: 4/27/16 Time: 8:00 pm State: IN Species: Eastern Weapon: SX3 Ammo: H-13# 7s Call: Hooks Deceiver and Lights Out Aluminum Beard 1: 10.5" Right Spur: 3/4" Left Spur: 5/8" Weight: 22 lbs Reason for success: Being patient in uncooperative windy weather. http://uploa...