Search found 2738 matches
- March 15th, 2024, 4:40 pm
- Forum: Gun Talk
- Topic: Osc for a knight tk
- Replies: 9
- Views: 240
Re: Osc for a knight tk
You aren't concerned about the foam (plastic) fouling the bore??
- March 9th, 2024, 11:14 am
- Forum: Small Bore
- Topic: Burris Fastfire 3
- Replies: 18
- Views: 834
Re: Burris Fastfire 3
I have both 3 and 8 moa. Makes no difference to me. Last week I sent the below to a friend who just mounted an FF3 and he asked me how I zero: Here’s how I do it: Buy a roll of construction paper from Home Depot. Attach a piece covering a real estate banjo sign which can be harvested at night in fro...
- March 6th, 2024, 6:28 am
- Forum: Fox Trot Ammo
- Topic: 46TEN youtube pattern testing
- Replies: 4
- Views: 173
Re: 46TEN youtube pattern testing
Thorough "show and tell" about the quality of Fox Trot--outstanding. Gil
- March 5th, 2024, 5:43 am
- Forum: Gun Talk
- Topic: TSS in older guns?
- Replies: 3
- Views: 253
Re: TSS in older guns?
While a Stevens may be a family heirloom with sentimental value, unless it is in fine close to unused condition, its value to a collector would not be in the same range as a Parker or LC Smith in American made vintage doubles. If it is old, the wood be more fragile than newer wood and while I wouldn...
- March 3rd, 2024, 7:25 am
- Forum: Gun Talk
- Topic: RMR out of elevation/windage
- Replies: 8
- Views: 235
Re: RMR out of elevation/windage
Have you eliminated the possibility that it is the rail at fault? Factory installed on what gun? Gil
- February 26th, 2024, 2:48 pm
- Forum: Gun Talk
- Topic: Advice on setting up a muzzle loading shotgun
- Replies: 14
- Views: 379
Re: Advice on setting up a muzzle loading shotgun
Over the years there have been several authors that posted info on their muzzle loaders. Can't recall names but one fellow made some beautiful guns and he gave some loading info using tss if I recall correctly.
- February 20th, 2024, 9:46 am
- Forum: Gobbler Talk
- Topic: Thoughts on a 4Runner
- Replies: 14
- Views: 549
Re: Thoughts on a 4Runner
You forgot to mention that the Lexus is probably 20 thousand more. If you reread what I said was contrary to what you wrote. Not that long ago a used 4R was higher in cost to purchase than a used Lexus 460GX for the same year. Whether that's true now or not, I don't know, but the Lexus depreciated ...
- February 20th, 2024, 9:14 am
- Forum: Gobbler Talk
- Topic: Aging gobblers
- Replies: 34
- Views: 1199
Re: Aging gobblers
There's a good reason why birds shouldn't be weighed, or beard and spurs measured. You deprive the bird of gaining weight, beards and spurs from lengthening after death when you retell the story. Weighing and measuring cements weight and length for all times unless you are willing to lie. Gil
- February 20th, 2024, 4:39 am
- Forum: Gobbler Talk
- Topic: Thoughts on a 4Runner
- Replies: 14
- Views: 549
Re: Thoughts on a 4Runner
If you do a lot of towing, you may want to consider the Lexus 460GX. V-8 and is a re-badged Prado which is the smaller Land Cruiser sold everywhere but here. Full time 4WD with center lock diff. I prefer the set up of the 4R, however. The 460GX has air suspension which can be pricey to repair. The &...
- February 19th, 2024, 6:29 pm
- Forum: Gobbler Talk
- Topic: Thoughts on a 4Runner
- Replies: 14
- Views: 549
Re: Thoughts on a 4Runner
It's okay to drive like that if you are hit by a job site concrete mixer that fell off of a trailer into your lane at a closing speed in excess of 100 mph. GilCamoMan4025 wrote: ↑February 19th, 2024, 4:40 pm In that second picture, I don't think you're supposed to drive like that??????????????
- February 19th, 2024, 6:26 pm
- Forum: Gobbler Talk
- Topic: Thoughts on a 4Runner
- Replies: 14
- Views: 549
Re: Thoughts on a 4Runner
The wheels on my 2022 are 17". Dunno what your Taco wheel size is. Soon after I bought the 2022 I replaced the tires with ones with more aggressive tread. The ones that came on it were called All Terrain, but were more suitable for highway driving than what I needed. I offered the tires to a ma...
- February 19th, 2024, 12:57 pm
- Forum: Gobbler Talk
- Topic: Thoughts on a 4Runner
- Replies: 14
- Views: 549
Re: Thoughts on a 4Runner
I've had two, a 2016 XE and currently have a 2022 TRD Off Road after the XE was totaled. I prefer all things covered as well; I have bird dogs and drive 1.5 hours each way on occasion and feel better about keeping them out of the cold at highway speed. The TRD Off Road has all the features of the TR...
- February 17th, 2024, 7:38 am
- Forum: Hunt Strategies
- Topic: Decoy or no decoy
- Replies: 52
- Views: 17774
Re: Decoy or no decoy
Training wheels for newbie turkey hunters. Like a youngster reluctant to shed training wheels on a bike, once they are ditched there is no going back. Gil
- February 12th, 2024, 5:38 am
- Forum: Call Makers
- Topic: Anybody made a copper surface call?
- Replies: 12
- Views: 439
Re: Anybody made a copper surface call?
I've made copper and aluminum calls by breaking the top glass on a Lil Duece (old style) and silicone gluing the metal disks into place. Not as pretty as a turned wooden pot, but works fine. I prefer the Lil Duece with the glass surface, however. Glass is less fussy to prepare the surface for consis...
- February 10th, 2024, 4:27 am
- Forum: Small Bore
- Topic: 410 vs 20ga youth starter gun
- Replies: 9
- Views: 463
Re: 410 vs 20ga youth starter gun
The first and most elementary thing which you need to do is determine eye dominance for both of the girls and proceed from there, teaching them to shoot w/ both eyes open. I'm a big fan of BB guns and plastic milk jugs and coke cans to teach gun safety, handling, stationary and wing shooting. I had...
- February 5th, 2024, 5:15 am
- Forum: Gun Talk
- Topic: Cz Bobwhite reviews
- Replies: 12
- Views: 21418
Re: Cz Bobwhite reviews
Back in the 1940s give a take a decade or two, there was a famous shotgun writer of the times, Col. Askins. Regarding one versus two triggers, he observed that had the single select trigger been invented first, the double triggered gun would have been hailed as an improvement. The mechanism of two t...
- February 3rd, 2024, 5:13 am
- Forum: Gobbler Talk
- Topic: Easterns this Spring
- Replies: 25
- Views: 12614
Re: Easterns this Spring
Shane, the extent of my plans is to get up and go. Years ago I gave up the notion that I wasn't "quality" fishing or hunting unless commercial jet travel was part of the plan. That or a drive lasting all day or more...I love the home woods and waters and do what I can with what is availabl...
- February 2nd, 2024, 8:51 am
- Forum: Gun Talk
- Topic: Gunsmith to drill and tap WBY Element?
- Replies: 18
- Views: 22149
Re: Gunsmith to drill and tap WBY Element?
With turkey season in the SE less than a month away in FL, this is SHTF time for fast return from smiths dedicated to turkey gun work. I expect within the next week or two folks will start looking for TSS and components. The time to start taking care of ammo and gunwork is months ago. Maybe this yea...
- January 20th, 2024, 4:33 am
- Forum: Gobbler Talk
- Topic: Winter comes to the South
- Replies: 6
- Views: 1595
Re: Winter comes to the South
Thanks. Rising river water helps, too. Shrinks available habitat. It's now happening in some, but not all waterways. Gil
- January 18th, 2024, 4:27 am
- Forum: Gobbler Talk
- Topic: Winter comes to the South
- Replies: 6
- Views: 1595
Re: Winter comes to the South
We're at the tail end of woodcock season and SE Ga. Only positive about the cold is that it will shove the birds here. Season has been spotty because of lack of consistent snotty weather up north until recently. Gil
- January 10th, 2024, 6:14 am
- Forum: Gun Talk
- Topic: Red-Dot and shimming
- Replies: 6
- Views: 19261
Re: Red-Dot and shimming
99% of the time, your red dot will adjust far enough to make up for any discrepancies in your POI. Don’t lose any sleep over it. Get your choke right. Mount the red dot and zero it at 10-15 yards with a dove load. Move out to 40 and shoot your turkey load. Make necessary adjustments but it should b...
- January 8th, 2024, 5:37 am
- Forum: Gun Talk
- Topic: Cz Bobwhite reviews
- Replies: 12
- Views: 21418
Re: Cz Bobwhite reviews
I never patterned the gun and was only interested in smaller shot sizes for quail and woodcock--never shot 6s. The first generation gun was 2.75". Dunno about the current model. There are 2.75" 1 oz. loads in 28 ga. Gil
- January 7th, 2024, 6:08 am
- Forum: Gun Talk
- Topic: Red Dot MOA size
- Replies: 3
- Views: 12323
Re: Red Dot MOA size
I have shot 3, 4, 6 and 8. At traditional turkey ranges, all work fine for turkeys. At 40 yards, 8 moa dot covers 3.2" ; 6 moa, 2.4": 4 moa, 1.6" and 3 moa, 1.2" Gil
- January 6th, 2024, 6:04 am
- Forum: Gun Talk
- Topic: Cz Bobwhite reviews
- Replies: 12
- Views: 21418
Re: Cz Bobwhite reviews
The CZ Bobwhite 28 ga. is a better balanced gun than the 20 ga. model. I shot one for quail and woodcock until last year when I gave it to the grandson of a longtime friend. It is an excellent gun weighing just over 5.25 lbs. It has a scaled action for 28 ga. and isn't just a pair of 28 ga. barrels ...
- December 24th, 2023, 12:05 pm
- Forum: Call Makers
- Topic: Newbie question on turkey call value
- Replies: 2
- Views: 2481
Re: Newbie question on turkey call value
That ad should reach more eyes than any other place on the internet. The value is what two folks wanting it and one more than the other is willing to pay for it. It is a machine made call probably assembled by someone who worked for him. Custom makers didn't use blister packs to sell their calls. I ...