Search found 26 matches

by OneShot
May 24th, 2017, 4:31 am
Forum: Calling & Competition Calling
Topic: Crow calls. Best of the best
Replies: 43
Views: 24916

Re: Crow calls. Best of the best

I hunt w/ a good friend/cousin that has a plethora of turkey calls, if you ask him at anytime what's the best, most consistent, turkey killingest call he has in his vest... he'll pull out his faulks crow call :lol: I'll say this, Bc I know I'm not the only one on this forum that's done it! But If yo...
by OneShot
April 15th, 2017, 1:30 am
Forum: Hunt Strategies
Topic: Unresponsive
Replies: 8
Views: 4845

Re: Unresponsive

You have a tract of land where turkeys gobble in the tree?!?! AND a few times on the ground?!?!
You sir are a blessed man!
by OneShot
April 5th, 2017, 3:31 am
Forum: Gobbler Talk
Topic: Best shot trap material?
Replies: 10
Views: 3028

Re: Best shot trap material?

Building my own shot trap and just wanted some opinions on what material is best to use to stop tss. Would like to keep it cheap if possible :thumbup: I found a roll of the ribbed rubber runner on clearance at Lowes. Works pretty well except for pieces coming off and making it harder to separate it...
by OneShot
April 4th, 2017, 2:25 am
Forum: Gun Talk
Topic: Strongest gun
Replies: 9
Views: 3344

Re: Strongest gun

Here is the link to the article mentioned above about the 55,000 psi on 870 barrels. http://www.shotgunlife.com/shotguns/tom-roster/important-information-about-shotshell-pressures.html Read an article as well just now that said benelli proofs their barrels to 19,571 psi. So rating wise that fabarm s...
by OneShot
April 3rd, 2017, 11:57 pm
Forum: Gun Talk
Topic: Strongest gun
Replies: 9
Views: 3344

Re: Strongest gun

Google search: Fabarm Tri-Bore Not saying other guns could not handle this type pressure, but I know of no other company that offers or advertises this type of barrel proof, I know also of no other manufacturers that recommend shooting steel shot thru anything tighter than a factory modified choke w...
by OneShot
March 7th, 2017, 11:25 pm
Forum: Gobbler Talk
Topic: Nitro TSS Loads
Replies: 7
Views: 3023

Re: Nitro TSS Loads

howl wrote:3 1/2" loads of 7.5s easily obtainable by the general public? That's it. I gotta find a hunt club.
:lol: :lol: :lol:
by OneShot
March 6th, 2017, 2:08 am
Forum: Gun Talk
Topic: Plastic Solvent
Replies: 8
Views: 3009

Re: Plastic Solvent

Any experience with either of these? http://www.cabelas.com/product/Birchwood-Casey-Bore-Scrubber-in-Bore-Cleaner/709888.uts?searchPath=%2Fbrowse.cmd%3FcategoryId%3D734095080%26CQ_search%3Dplastic%2Bsolvent http://www.cabelas.com/product/BIRCHWOOD-BORE-SCRUBBER-FOAM/1859968.uts?searchPath=%2Fbrowse...
by OneShot
March 6th, 2017, 1:31 am
Forum: Gun Talk
Topic: Plastic Solvent
Replies: 8
Views: 3009

Re: Plastic Solvent

-Throw your solvents in the trash and buy 2 HVAC brushes(stainless for chokes, brass for barrels) Rod ( I make my own, 10X cheaper and 10X stronger) , paper towel, shot or two of Rem-oil, high speed drill -2 minutes tops and done! -They will also outlast any gauge specific bore brush you can buy 100...
by OneShot
February 28th, 2017, 10:49 pm
Forum: Gobbler Talk
Topic: STABILITY!!
Replies: 10
Views: 3157

Re: STABILITY!!

hoobilly wrote:by chance do you also love to use hevishot? :lol:
Luke and His dad DEFINITELY shoot Magnum Blend!
by OneShot
February 25th, 2017, 6:52 pm
Forum: Equipment/Product Reviews
Topic: Box Calls
Replies: 19
Views: 10192

Re: Box Calls

Don't think I've ever hunted with a man that didn't own at least one Fool Proof, I got mine on a 5 finger discount from my ole man, Figure its from early 80's if I had to guess. Have a Friend that has 4 of em, a newer one, one of the first ones sold, one from the last year they were made in Alabama,...
by OneShot
February 25th, 2017, 6:34 pm
Forum: Gobbler Talk
Topic: OH YEAH!!!!
Replies: 11
Views: 2892

Re: OH YEAH!!!!

HunterGKS wrote: I AM PUMPED & READY TO GO BUT STILL HAVE 56 DAYS & A WAKE UP!!!!
& a wakeup ?!?! You expecting to sleep the night before??
by OneShot
February 23rd, 2017, 7:27 pm
Forum: Gun Talk
Topic: Length of Pull for youth gun?
Replies: 9
Views: 5770

Re: Length of Pull for youth gun?

I thought I had heard of every stock modification their was, until this....
Flip Flops, that's pure genious.
by OneShot
February 23rd, 2017, 2:59 am
Forum: Gun Talk
Topic: Length of Pull for youth gun?
Replies: 9
Views: 5770

Re: Length of Pull for youth gun?

General rule of thumb for LOP is measure form crease of the inside bend of the arm to middle crease of the trigger finger. However you can't get that exact measurement now, I do have this experience, when my ole man first started me out w/ an Youth H&R .410 (12 1/2" LOP) and it was still to...
by OneShot
February 22nd, 2017, 7:00 pm
Forum: Gun Talk
Topic: Want to get my daughter shooting
Replies: 12
Views: 3556

Re: Want to get my daughter shooting

Having a daughter thats probably a wee bit younger than yours, she's just not quite there yet this season, I have thought about this, But I have not done it, so others may have more experience and a load already. A youth 20 gauge with a 3/4 oz. load of TSS #9s would be the ticket. A 3/4 oz. load of ...
by OneShot
February 15th, 2017, 7:37 pm
Forum: Small Bore
Topic: Base for a mueller quik shot
Replies: 5
Views: 2495

Re: Base for a mueller quik shot

]I bought cheap $10 Redfield 2 piece bases from a local cabelas to put on a youth 870 20 gauge. locked it down in a vise on a drill press, Measured the hole spacing to match that of a factory 870 12 ga spacing in case it didn't hold I could switch to more expensive one piece base. Drilled and tapped...
by OneShot
February 12th, 2017, 9:32 am
Forum: Gun Talk
Topic: CZ Mallard Barrel Regulation
Replies: 16
Views: 4596

Re: CZ Mallard Barrel Regulation

8-10" is extreme, but I have seen worse, almost double that, out of a Luxus F3, needless to say that gun got sent back to Blaser. Over the phone when he told them it was a ft. and half high at 20 yds they thought he was crazy. When they got the gun and shot it they called him back and said wow ...
by OneShot
February 12th, 2017, 3:52 am
Forum: Gun Talk
Topic: CZ Mallard Barrel Regulation
Replies: 16
Views: 4596

Re: CZ Mallard Barrel Regulation

Maybe this will help a bit w/ my previous explanation. In these pictures, their is a laser in both barrels and they are pointed out across the yard onto a fence pole at 30 yds. there is about a 5" gap between point of impact between both barrel on the vertical pole at 30 yards. In one picture y...
by OneShot
February 11th, 2017, 11:54 pm
Forum: Gun Talk
Topic: CZ Mallard Barrel Regulation
Replies: 16
Views: 4596

Re: CZ Mallard Barrel Regulation

one shot will not be able to tell you the true difference. just bc they are 5.5" apart at 30 yd don't mean they will be further apart at 40yds. its dependent upon the angle of the barrel or barrels vs angle of the rib/bead. if that makes any sense. The barrels POI in relation to the bead may be...
by OneShot
February 10th, 2017, 4:08 am
Forum: Gun Talk
Topic: Looking for a new 28gauge
Replies: 16
Views: 5453

Re: Looking for a new 28gauge

I do not own, however I've put many rounds down one, I shoot skeet several days a week with a man that has the Tri-star 28 in his arsenal, since last August I've seen thousands and thousands of hulls fly out of that gun and its never had a hiccup from factory shells, reloads, light loads, heavy load...
by OneShot
February 6th, 2017, 1:25 am
Forum: Gun Talk
Topic: New Ruger American 22lr....
Replies: 10
Views: 3462

Re: New Ruger American 22lr....

I bought the 1:9 twist , threaded 10/22 barrel just for the AG 60's... they are bad!, but I didn't get the memo about having to run a bolt stop to shoot em... After a couple rounds of the bolt blowing back and throwing smoke and unburned powder in my face, combined with a quick google search, I got ...
by OneShot
February 5th, 2017, 12:09 am
Forum: Small Bore
Topic: Sighting in a red dot question?
Replies: 8
Views: 3570

Re: Sighting in a red dot question?

Take a $20(amazon)-$30(walmart) Bushnell Laser boresighter, they come with 20 and 12 gauge arbors. take your choke out, insert the boresight into the choke, tighten the arbor up in the choke. screw the choke in the gun, make sure the bore sight cap is screwed down, all the way! tight! wait till its ...
by OneShot
February 2nd, 2017, 7:37 pm
Forum: Small Bore
Topic: DND Haymaker
Replies: 5
Views: 2628

Re: DND Haymaker

Interesting that it was better at 70 than the IC note the difference in the barrel lengths on the far left. I haven't tested the IC on the 26" barrel, the Extra barrel length also increases velocity, this is true for anything you put down the barrel, factory or handload. But, considering the e...
by OneShot
February 2nd, 2017, 6:34 pm
Forum: Small Bore
Topic: DND Haymaker
Replies: 5
Views: 2628

Re: DND Haymaker

Image
*disregard 10" percentage for the 8's and 9's mix, it was calculated using straight 9's pellet count

870 21" barrel. load/10"/20"

Fed hvt #7 factory.... 172/308 26" 189/313
Federal 3rd degree... 88/170
Hevi-Blend................ 100/205
by OneShot
February 1st, 2017, 7:12 pm
Forum: Small Bore
Topic: Is anyone making yildiz 28 gauge choke tubes
Replies: 9
Views: 7080

Re: Is anyone making yildiz 28 gauge choke tubes

i'll +1 you on the no ports! Had to scrape the plastic, powder, and reclaim shot graphite gunk mix off em w/ a knife every hundred rounds or so then dermal with a stainless brush to clean em back up... never again.
by OneShot
February 1st, 2017, 6:23 pm
Forum: Gun Talk
Topic: 20 guage tss choke
Replies: 13
Views: 5218

Re: 20 guage tss choke

some Data I have collected over past two weeks, figured it would be easier to look at a spreadsheet than post a bunch of pattern pictures. gives you an idea of what to expect, two different barrels tested and 4 different chokes. These were all just one shot groups not averages or anything. Hope it h...

Go to advanced search